Search

A 16GB micro SD memory card bundled with a full-size SD adapter, purpose-built for REED SD-Series data loggers. Use it to expand or replace onboard st..

A North American-standard 110V AC power adapter for REED SD-Series data loggers, stepping 120V mains power down to a regulated 9V DC supply. Fitted wi..

A 24-inch strip of reflective tape meant to be cut into small tabs and applied to a rotating shaft or component so a photo tachometer can pick up a cl..

This heated semiconductor gas sensor detects gasoline, propane, natural gas or fuel oil. For use it with the REED C-383 combustible gas detector.

This windshield ball is compatible with 1/2" microphones.

The SD-230-Kit2 bundles REED's SD-230 data-logging meter with a PE-11 pH electrode and an ORP-14 ORP electrode. It measures pH from 0.00-14.00 and ORP..

The REED SD-6020-NIST is a data-logging push/pull force gauge with a 20 kg (44 lb) capacity and a reversible display that stays readable no matter whi..

A higher-capacity version of REED's SD-series force gauge, recording push and pull forces up to 220 lb (100 kg) with the same reversible-display desig..

This is a genuine REED replacement load cell sensor for the SD-6100 Data Logging Force Gauge, intended to restore or replace the force-sensing element..

The REED SD-6100-NIST is the higher-capacity sibling of the SD-6020, measuring push and pull forces up to 100 kg (220 lb) with a 4-digit backlit LCD t..

The REED SD-9901 is a multi-probe indoor air quality data logger that simultaneously records oxygen, carbon dioxide, carbon monoxide, temperature, and..

The REED SW-U801-WIN is companion PC software for REED's 8-channel data-logging instruments, letting users download, view, graph, and export stored re..

The REED SW700 combines a precision stopwatch with a built-in environmental monitor, tracking temperature, humidity, heat index, and dew point alongsi..

The SW700 combines a precision stopwatch with a built-in temperature/humidity sensor that calculates heat index and dew point, helping gauge how condi..

A rugged safety test lead kit pairing a matched set of right-angle/straight banana-plug test leads with a set of insulated alligator clips. Rated CAT ..

Ultrasonic thickness gauge for non-destructive wall-thickness checks on steel, aluminum, copper, and various plastics, covering 0.05-7.9 in (1.5-200mm..

Bundles the REED TM-8811 ultrasonic thickness gauge with a steel 5-step calibration block marked in both imperial and metric scales, letting technicia..

Same ultrasonic thickness gauge platform as the standard TM-8811, measuring 0.05-7.9 in (1.5-200mm) across ten preset material types with automatic ca..

Replacement ultrasonic probe for the REED TM-8811 series thickness gauges, for when the original probe wears out or is damaged. Drop-in compatible wit..

The REED TP-01 is a Type K beaded thermocouple wire probe rated for -40 to 250C (-40 to 482F). It has a roughly 38-inch (96.5 cm) lead wire, color-cod..