Search

The REED R2310 is an IP65-rated infrared thermometer with a 12:1 distance-to-spot ratio, measuring -35 to 650C (-31 to 1202F). It includes a Class II ..

The REED R2310-NIST is a rugged handheld infrared thermometer built for quick, non-contact surface readings from -35C to 650C (-31F to 1202F) at a 12:..

The REED R2320 is a professional infrared thermometer with a 30:1 distance-to-spot ratio, measuring from -32C to 800C with a built-in laser pointer fo..

The REED R2320-NIST professional infrared thermometer extends measurement range to -32C/800C (-26F/1472F) with a tighter 30:1 distance-to-spot ratio f..

The REED R2330 is a professional infrared thermometer with a 50:1 distance-to-spot ratio, letting users take accurate readings of small targets from f..

The REED R2330-NIST is a higher-temperature infrared thermometer rated to -32C/1250C (-26F/2282F) with a 50:1 distance-to-spot ratio, suited to furnac..

The REED R2340 is a professional-grade infrared thermometer combining a 55:1 distance-to-spot ratio with an integrated Type K thermocouple input, lett..

This is the NIST-certified version of REED's R2340 professional infrared thermometer, sharing the same 55:1 distance-to-spot ratio, -50C/1850C range, ..

The REED R2400 is a single-input Type K thermocouple thermometer covering -50 to 1300C (-58 to 2000F), with a backlit LCD that can display readings in..

This kit pairs the REED R2400 Type K single-input thermocouple thermometer with three interchangeable probes, a surface probe, an air/gas probe, and a..

The REED R2400-NIST is a single-input Type-K thermocouple thermometer with a large backlit LCD, measuring -58 to 2000F (-50 to 1300C) with selectable ..

The R2450SD-Kit3 pairs the 4-channel data logging thermometer with four Type K beaded-wire probes, an SD card, and an AC power adapter, letting users ..

The REED R2900 is a benchtop dry block calibrator spanning 91 to 572F (33 to 300C), built for verifying RTDs, thermocouples, and bimetal thermometers...

This is the NIST-certified version of REED's R2900 dry block calibrator, covering the same 91 to 572F (33 to 300C) range for calibrating RTDs, thermoc..

This surface thermocouple probe is designed for flat or convex surface temperature measurements. Exposed ribbon allows for direct contact with surface..

The R2920 is a Type K surface probe with an exposed ribbon contact tip built for fast, direct-contact readings on flat or gently curved surfaces, cove..

This REED R2930 is a Type K right-angle surface thermocouple probe designed to measure temperatures on flat surfaces and inside hard-to-reach areas su..

The R2930 is a 90-degree right-angle version of REED's Type K surface probe, letting the sensor tip contact a flat surface or duct wall while the hand..

The R2970 is a bright yellow, spring-loaded pipe-clamp thermocouple probe designed to snap securely onto pipes and tubing up to about 1.4 in in diamet..

A spring-loaded Type K thermocouple probe built to clamp directly onto pipes up to about 1.4 in (35 mm) across, so technicians can log surface tempera..