Search

75% humidity calibration standard for verifying and calibrating the same family of REED humidity meters (R6001, SD-3007, 8706, R6200, R9900, R9905, R6..

Two-point humidity calibration kit pairing the 33% (R9933) and 75% (R9975) standards in one package, for verifying humidity meters across their workin..

The REED RINSPECT-KIT bundles the essential tools a home inspector needs in one case: an infrared thermometer, a dual moisture meter, a non-contact vo..

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

This heated semiconductor gas sensor detects gasoline, propane, natural gas or fuel oil. For use it with the REED C-383 combustible gas detector.

The SD-230-Kit2 bundles REED's SD-230 data-logging meter with a PE-11 pH electrode and an ORP-14 ORP electrode. It measures pH from 0.00-14.00 and ORP..

This Automatic Temperature Compensation (ATC) probe connects to the SD-230 pH/ORP Datalogger for increased accuracy.

The TP-R01 is a genuine Reed Instruments replacement PT100 RTD temperature probe made specifically for the Reed C-370 RTD thermometer. It swaps in dir..

The SinoGNSS A300 is a compact, all-in-one GNSS receiver that combines antenna, GNSS module and communication electronics inside a single sealed dome,..

A compact choke-ring GNSS antenna covering GPS, GLONASS, BeiDou, Galileo and SBAS signal bands, with the concentric ring design that suppresses multip..

A full-constellation, triple-frequency survey antenna that tracks GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS, SBAS and L-Band signals for precise posi..

The AT600 is ComNav's full-performance choke ring GNSS antenna, built around a 3D choke-ring ground plane that rejects multipath signal reflections fo..

The SinoGNSS DS3-SN32 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

The SinoGNSS DS3-SN36 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

It is mainly aimed at high-precision measurement of construction projects, mines, roads and bridges, etc. Easy to operate, clear imaging, Waterproof f..

The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..

The SinoGNSS E300 with the C50 camera option uses the same RTK/PPK-equipped mapping airframe as the base E300, but is fitted with ComNav's higher-spec..