Search

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

The SD-230-Kit2 bundles REED's SD-230 data-logging meter with a PE-11 pH electrode and an ORP-14 ORP electrode. It measures pH from 0.00-14.00 and ORP..

This Automatic Temperature Compensation (ATC) probe connects to the SD-230 pH/ORP Datalogger for increased accuracy.

The SinoGNSS A300 is a compact, all-in-one GNSS receiver that combines antenna, GNSS module and communication electronics inside a single sealed dome,..

The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..

The SinoGNSS E300 with the C50 camera option uses the same RTK/PPK-equipped mapping airframe as the base E300, but is fitted with ComNav's higher-spec..

A handheld 3D laser scanner from ComNav's SinoGNSS line that uses SLAM-based simultaneous localization and mapping rather than GNSS signals, so it can..

The backpack kit turns the LS300 into a wearable mobile mapping rig for walking surveys outdoors. It's roughly 33x26x16cm, weighs about 2.21kg, uses a..

This roof/vehicle mount kit attaches the LS300 laser scanner to a car for fast mobile scanning of roadside infrastructure and corridors. It measures r..

This mount kit lets the SinoGNSS LS300 3D laser scanner pair with a DJI Matrice 300 drone for aerial LiDAR mapping. It's built from aviation-grade alu..

A Li-ion battery pack for the LS300 laser scanner.

A frame backpack designed to carry the LS300 laser scanner and its accessories.

This is the long-range configuration of the SinoGNSS LS600 handheld 3D laser scanner, a 32-line unit extended to a 300-metre working range for larger-..