Search

Handheld carbon monoxide meter with a stabilized electrochemical sensor covering 1 to 1000 ppm alongside an ambient temperature readout from -4 to 158..

A desktop/wall-mount monitor that simultaneously displays carbon monoxide (0-999 ppm), relative humidity (10-90% RH), temperature (0-50C), and the tim..

An AC mains power adapter for the REED R9450 carbon monoxide monitor (also compatible with the R6200), letting it run continuously off wall power inst..

Desktop/wall-mount carbon monoxide monitor that simultaneously displays CO concentration, ambient temperature, relative humidity, and the time and dat..

This dual-purpose handheld tester checks both battery acid specific gravity (1.15-1.30) and antifreeze/coolant freezing point for ethylene and propyle..

The REED R9700 is a handheld optical refractometer that checks automotive coolant freeze protection (both ethylene and propylene glycol) and battery a..

A replacement 7.4V lithium battery pack sized and rated to match the power requirements of the REED R9930 air particle counter, for restoring runtime ..

A form-fitting hard-shell case built to protect small handheld meters and probes in transit. It measures 8.75 x 6.5 x 2.25 inches on the outside with ..

The REED RINSPECT-KIT bundles the essential tools a home inspector needs in one case: an infrared thermometer, a dual moisture meter, a non-contact vo..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

Optional RTD Temperature Probe for use with the REED SD-947 Data logging Thermometer.Features: Measurement range: -58 to 752°F (-50 to 400°C) Clas..

The REED TP-01 is a Type K beaded thermocouple wire probe rated for -40 to 250C (-40 to 482F). It has a roughly 38-inch (96.5 cm) lead wire, color-cod..

A basic beaded-tip Type K wire probe intended for everyday spot-checks with any Type K meter or thermometer, color-coded per ANSI thermocouple convent..

It is mainly aimed at high-precision measurement of construction projects, mines, roads and bridges, etc. Easy to operate, clear imaging, Waterproof f..

It is mainly aimed at high-precision measurement of construction projects, mines, roads and bridges, etc. Easy to operate, clear imaging, Waterproof f..

The XP100 pilling guidance system (sensor configuration 4) is the same piling-guidance hardware with four sensors installed.

The Toknav T40 is a GNSS RTK rover receiver with 1408 channels covering GPS, GLONASS, BDS, Galileo, QZSS, SBAS and NavIC, delivering roughly 8mm+1ppm ..

The T40Pro is a rugged RTK GNSS rover with a magnesium-alloy, IP68-rated housing and hot-swappable dual batteries for over 20 hours of continuous fiel..