Search

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

A handheld thermocouple calibrator that sources and measures 8 thermocouple types (R, S, B, E, K, J, T, N) plus DC volts, used to check and calibrate ..

The REED R2810-NIST is a handheld thermocouple calibrator that can both source and measure eight thermocouple types (R, S, B, E, K, J, T, N) plus mill..

This calibrator sources and reads 11 thermocouple types (A, B, C, D, E, J, K, N, R, S, T) and 5 RTD types (Pt100, Pt200, Pt500, Pt1000, Cu50), plus DC..

This is the NIST-certified version of REED's R2815 calibrator, sourcing and measuring 11 thermocouple types and 5 RTD types along with DC voltage and ..

The REED R2900 is a benchtop dry block calibrator spanning 91 to 572F (33 to 300C), built for verifying RTDs, thermocouples, and bimetal thermometers...

This is the NIST-certified version of REED's R2900 dry block calibrator, covering the same 91 to 572F (33 to 300C) range for calibrating RTDs, thermoc..

Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts.Features: Measurement range: -58 to 1652°F (-50 to..

The R2940 is a Type K air/gas probe with a perforated stainless-steel shield around the sensing tip, designed to measure moving air and gas streams su..

This Type K immersion thermocouple probe measures temperatures from -50C to 600C (-58F to 1112F) with a response time under 2 seconds. It has a roughl..

The R2950 is a Type K immersion/general-purpose probe intended for dipping into liquids such as water, oils and non-corrosive fluids, with a straight ..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

The R2960 is a Type K needle-tip probe with a slim hypodermic-style tip meant to pierce into food, rubber, gels and other soft solids for an internal ..

The R2980 is a Type K air-temperature probe purpose-built for monitoring ovens, refrigerators, and freezers, with a stainless-steel shielded tip that ..

An air-temperature Type K probe purpose-built for ovens, walk-in coolers, and freezers, with a stainless-steel shield around the sensing tip so it rea..

A palm-sized water quality meter with a dual-panel backlit LCD that logs pH readings from 0.00 to 14.00 and ORP readings up to +/-1999 mV directly ont..

This bundle pairs the R3000SD data-logging pH/ORP meter with a general-purpose pH electrode and a dedicated ORP electrode, ready to start testing out ..

Building on the base kit, this configuration adds the R3000SD meter with its pH and ORP electrodes plus a pair of calibration buffer solutions (pH 4.0..

The most complete R3000SD package, combining the meter, pH electrode, ORP electrode, and an ATC temperature probe for automatic compensation, along wi..

This REED R3000SD data-logging meter reads pH from 0 to 14 and ORP up to 1999 mV, with automatic temperature compensation and a backlit dual display f..