Search

This digital stopwatch times up to 23 hours, 59 minutes, 59 seconds with 1/100-second resolution and rated accuracy of +/-3 seconds per day, and it ca..

This digital stopwatch times up to 23 hours, 59 minutes, 59 seconds with 1/100-second resolution and rated accuracy of +/-3 seconds per day, and it ca..

The REED SW700 combines a precision stopwatch with a built-in environmental monitor, tracking temperature, humidity, heat index, and dew point alongsi..

The SW700 combines a precision stopwatch with a built-in temperature/humidity sensor that calculates heat index and dew point, helping gauge how condi..

A rugged safety test lead kit pairing a matched set of right-angle/straight banana-plug test leads with a set of insulated alligator clips. Rated CAT ..

Ultrasonic thickness gauge for non-destructive wall-thickness checks on steel, aluminum, copper, and various plastics, covering 0.05-7.9 in (1.5-200mm..

Bundles the REED TM-8811 ultrasonic thickness gauge with a steel 5-step calibration block marked in both imperial and metric scales, letting technicia..

Same ultrasonic thickness gauge platform as the standard TM-8811, measuring 0.05-7.9 in (1.5-200mm) across ten preset material types with automatic ca..

Replacement ultrasonic probe for the REED TM-8811 series thickness gauges, for when the original probe wears out or is damaged. Drop-in compatible wit..

The REED TP-01 is a Type K beaded thermocouple wire probe rated for -40 to 250C (-40 to 482F). It has a roughly 38-inch (96.5 cm) lead wire, color-cod..

A basic beaded-tip Type K wire probe intended for everyday spot-checks with any Type K meter or thermometer, color-coded per ANSI thermocouple convent..

The TP-R01 is a genuine Reed Instruments replacement PT100 RTD temperature probe made specifically for the Reed C-370 RTD thermometer. It swaps in dir..

The REED USB-01 is the dedicated USB interface cable used to connect compatible REED SD-series dataloggers (and the TQ-8800) to a PC for use with REED..

The REED WG-01 Wedge Grip is an accessory attachment for compatible REED force gauges, holding flat or sheet-like test material securely in place duri..

A grab-and-go inspection bundle built for home inspectors and DIY buyers, combining an infrared thermometer, a digital psychrometer, pinless and pin-t..

A compact acoustic foam ball windshield sized for 1/2 in microphones, designed to slip over a sound level meter's mic capsule to cut wind noise and br..

The SinoGNSS A100 Pro is a compact, palm-sized smart antenna that combines a full-constellation, multi-frequency GNSS module, an integrated gyroscope,..

The SinoGNSS A300 is a compact, all-in-one GNSS receiver that combines antenna, GNSS module and communication electronics inside a single sealed dome,..

The AG501 Pro is ComNav's autosteer kit for precision agriculture, built around the A100 Pro smart antenna that combines a GNSS receiver, gyroscope an..

A compact choke-ring GNSS antenna covering GPS, GLONASS, BeiDou, Galileo and SBAS signal bands, with the concentric ring design that suppresses multip..