Search

Reed's R9850 is an industrial portion-control scale rated to 15 kg (33 lb) with a stainless-steel weighing platform and 2g resolution. It switches bet..

The REED R9905-KIT is a data-logging indoor air quality meter that simultaneously tracks CO2, temperature, and relative humidity on a triple LCD reado..

A replacement carbon dioxide probe compatible with the REED R9910SD and SD-9901 data logging air quality meters. Lets a technician restore CO2 measure..

The REED R9910SD-KIT is a data-logging indoor air quality meter capable of monitoring three probes at once, covering oxygen, CO2, carbon monoxide, tem..

A form-fitting hard-shell case built to protect small handheld meters and probes in transit. It measures 8.75 x 6.5 x 2.25 inches on the outside with ..

A padded soft-sided carrying case made of durable polyester with built-in elastic loops and compartments to keep multiple test instruments organized. ..

Features: Accomodates up to 3 small to medium sized instruments Interior accessory pocket and removable velcro partitions Adjustable shoulder strap M..

Bundles the REED TM-8811 ultrasonic thickness gauge with a steel 5-step calibration block marked in both imperial and metric scales, letting technicia..

The REED USB-01 is the dedicated USB interface cable used to connect compatible REED SD-series dataloggers (and the TQ-8800) to a PC for use with REED..

A frame backpack designed to carry a handheld laser scanner and its accessories in the field.

The SINOPOLE is a two-metre, four-section carbon-fibre GNSS rover rod used to hold a survey antenna/receiver at a fixed height above a survey point.

The SINDHC dual hard carry case holds two GNSS receiver kits side by side for transport.

The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..

The SinoGNSS E300 with the C50 camera option uses the same RTK/PPK-equipped mapping airframe as the base E300, but is fitted with ComNav's higher-spec..

A TNC coaxial antenna cable connecting the G200 receiver to its external GNSS antenna.

A Li-ion battery pack for the LS-series laser scanner.

A handheld 3D laser scanner from ComNav's SinoGNSS line that uses SLAM-based simultaneous localization and mapping rather than GNSS signals, so it can..

The backpack kit turns the LS300 into a wearable mobile mapping rig for walking surveys outdoors. It's roughly 33x26x16cm, weighs about 2.21kg, uses a..