Search

True RMS AC/DC solar clamp meter measuring current up to roughly 1000A, AC voltage to 1500V, and DC voltage to 2500V, with a 9,999-count backlit displ..

True RMS digital multimeter measuring AC/DC voltage to 1000V, current to 10A, resistance, capacitance, frequency, and Type K temperature up to 1000C, ..

4,000-count autoranging pocket multimeter with a built-in non-contact voltage detector, measuring AC/DC voltage to 600V, AC/DC current to 400mA, resis..

The REED R5210 plugs straight into any standard 3-wire outlet to instantly reveal common wiring faults such as open ground, open neutral, reversed hot..

A two-piece REED R5320 kit pairing a wire-tracing transmitter with a handheld receiver, built for locating and testing RJ11/RJ45 and other unpowered c..

A two-piece transmitter/receiver system for tracing live and de-energized wires, cables, and metallic conductors hidden in walls, floors, ceilings, or..

The same pulse-reflection cable length and resistance tester as the standard R5340 -- up to about 100,000 feet of range, 20 preset plus 8 user-defined..

Capacitance decade box for circuit design and prototyping, letting users dial in a target capacitance from 100pF up to 11.111uF across 5 decade ranges..

The R5408 is a resistance decade box used for prototyping and testing circuits, offering 7 switch-selectable decade ranges spanning roughly 1 ohm up t..

This is the same REED R5408 resistance decade box -- 7 switch-selectable decade ranges from 1 ohm to roughly 11.1 megohms in 1-ohm steps, with slide s..

The REED R5500 is a 3-in-1 electrical tool that combines a circuit breaker finder, a receptacle wiring tester, and a GFCI tester in one kit. Plug the ..

The REED R5600 combines an insulation resistance meter and general multimeter in one rugged, double-molded housing. It offers test voltages of 250V, 5..

A genuine replacement alligator clip for the REED R5600 insulation tester, sold individually to swap out a worn or broken clip without buying a whole ..

The REED R5600 is a combination insulation tester (megohmmeter) and multimeter that tests insulation resistance at 250V, 500V, and 1000V test voltages..

A replacement kickstand made specifically for the REED R5600 insulation tester, letting the meter stand upright on a bench or work surface for hands-f..

The REED R5700 is a clamp-on ground resistance tester that measures earth resistance and leakage current without needing auxiliary ground spikes, maki..

A clamp-style ground resistance tester that measures earth resistance and leakage current without needing auxiliary ground stakes, letting a single ea..

The REED R5710 is a clamp-on earth ground resistance tester that measures ground resistance without needing auxiliary ground stakes, using auto-rangin..

This bench simulator sources precise DC voltage (0 to 11V, 1mV resolution) and DC current (0 to 20mA, 0.001mA resolution) signals for testing and cali..

The REED R5805-NIST is a handheld voltage and current source used to bench-test meters, controllers, and sensor loops. It outputs roughly -1 to 11V DC..