Search

The REED R8100SD-KIT is a data-logging light meter that measures ambient light up to 100,000 lux (10,000 foot-candles) with a clear backlit LCD displa..

The REED R8100SD is an SD-card data-logging light meter reading up to 100,000 lux (10,000 fc) through a detachable photodiode sensor with CIE-matched ..

A genuine replacement light sensor with its own protective cover, built as the detachable probe for REED's R8100SD and SD-1128 data-logging light mete..

The R9100 is a handheld ultrasonic leak detector that converts the inaudible high-frequency sound produced by escaping gas, air, vacuum, or fluid at a..

A 24-inch strip of reflective tape meant to be cut into small tabs and applied to a rotating shaft or component so a photo tachometer can pick up a cl..

This heated semiconductor gas sensor detects gasoline, propane, natural gas or fuel oil. For use it with the REED C-383 combustible gas detector.

A higher-capacity version of REED's SD-series force gauge, recording push and pull forces up to 220 lb (100 kg) with the same reversible-display desig..

This is a genuine REED replacement load cell sensor for the SD-6100 Data Logging Force Gauge, intended to restore or replace the force-sensing element..

The REED SD-6100-NIST is the higher-capacity sibling of the SD-6020, measuring push and pull forces up to 100 kg (220 lb) with a 4-digit backlit LCD t..

The SinoGNSS A100 Pro is a compact, palm-sized smart antenna that combines a full-constellation, multi-frequency GNSS module, an integrated gyroscope,..

The C100 is a reflectorless total station built for coordinate, angle, and traverse survey work with prism-free ranging.

The SinoGNSS XE100 is ComNav's 3D machine-guidance kit for excavators, pairing dual GNSS antennas with boom, stick, bucket and body-mounted inclinomet..

The XE100 is a machine guidance system pairing a GNSS receiver with an in-cab display, mounted on excavators for real-time grading and digging guidanc..

The XP100 static pilling guidance system (sensor configuration 0) helps position piling rigs precisely using GNSS-based guidance.

The XP100 pilling guidance system (sensor configuration 1) is the same piling-guidance hardware with one sensor installed.

The XP100 pilling guidance system (sensor configuration 2) is the same piling-guidance hardware with two sensors installed.

The XP100 pilling guidance system (sensor configuration 3) is the same piling-guidance hardware with three sensors installed.

The XP100 pilling guidance system (sensor configuration 4) is the same piling-guidance hardware with four sensors installed.