Search

This digital caliper covers a full 0-12 in / 0-300 mm range with 0.0005 in (0.01 mm) resolution, built around a hardened stainless steel head and body..

The R7900-KIT bundles the standard Reed R7900 ultrasonic thickness gauge with Reed's R9060 five-step steel calibration block, which carries both imper..

This all-in-one kit pairs the REED R8050 dual-range sound level meter with the R8090 acoustic calibrator, so you can verify your readings are accurate..

This kit pairs the REED R8050 dual-range Type 2 sound level meter with the REED R8090 acoustic calibrator, packaged together in a hard, laser-cut foam..

This all-in-one kit pairs a REED R8080 data-logging sound level meter with a matching R8090 acoustic calibrator, so you can measure noise levels and v..

This kit bundles the REED R8080 data-logging sound level meter with the REED R8090 acoustic calibrator in a rugged, custom-foam hard case, plus a wind..

This is the factory replacement microphone-and-clip assembly for the REED R8085 noise dosimeter, built around the same 0.5 in (12.7mm) electret conden..

This sound calibrator generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter. The..

The REED R8090 is a compact acoustic calibrator used to field-verify sound level meters before and after noise surveys, generating a steady reference ..

A dedicated data-logging light meter reading from roughly 2,000 up to 100,000 lux (200-10,000 foot-candles) through a detachable, protective-covered s..

The REED R8100SD-KIT is a data-logging light meter that measures ambient light up to 100,000 lux (10,000 foot-candles) with a clear backlit LCD displa..

The REED R8100SD is an SD-card data-logging light meter reading up to 100,000 lux (10,000 fc) through a detachable photodiode sensor with CIE-matched ..

A higher-range compact light meter measuring up to 40,000 foot-candles (400,000 lux) via a tethered sensor, aimed at brighter environments than REED's..

The REED R8130 is a wide-range light meter with a tethered sensor probe, reading up to 400,000 lux (40,000 fc) for demanding photographic, film and in..

Purpose-built for measuring modern LED, incandescent, and colored (red/green/yellow/blue/white) light sources, this auto-ranging meter reads up to 199..

A pocket-sized light meter with a tethered sensor probe, measuring up to 50,000 Lux (5,000 Fc) for Lux or Foot-candle readings. It features an LCD dis..

This kit pairs the REED 8706 digital psychrometer/thermo-hygrometer with a set of 33% and 75% humidity calibration standards, so users can verify and ..

A compact voltage/current calibrator that both sources and measures mV and mA signals, including the ability to power and read a two-wire current loop..

A calibration/verification kit for coating thickness gauges, supplying a calibration iron piece, a calibration aluminum piece, and reference foil film..

The REED R9060 is a steel 5-step calibration block used to verify and check the accuracy of ultrasonic thickness gauges before field use. Machined fro..