Search

The REED HT-6510A is a pocket-sized digital Shore A durometer for checking the hardness of rubber, elastomers, neoprene, soft PVC and similar material..

This is the same REED HT-6510A Shore A durometer (10-90 HA range, 0.1 HA resolution, max/average hold, zero-adjust) but supplied with a NIST-traceable..

This handheld digital stroboscope uses a flashing xenon lamp to visually freeze the motion of rotating or reciprocating machinery, letting technicians..

This is a genuine REED replacement xenon flash bulb designed for the K4020 and K4020-230V digital stroboscopes (also compatible with the K4030 series)..

The REED K4020-NIST is a digital xenon stroboscope for non-contact speed measurement of rotating equipment such as fans, motors, pumps and centrifuges..

This reference leak source is a calibration accessory for REED's C-380 refrigerant leak detector (also compatible with the C-383 and R9300), used to v..

This compact anemometer measures in fpm, m/s, kph, mph and knots. The LM-81AM keeps track of minimum and maximum readings and features a data hold fun..

This compact vane anemometer measures air velocity in fpm, m/s, km/h, mph and knots across a 80-5910 fpm (0.4-30 m/s) range, with a fast sub-1-second ..

This type k male connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-181 is rated up 425°F (250°C) and i..

This type k female connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-182 is rated up 425°F (250°C) and..

For use with REED multimeters and clamp meters.

For use with the REED SD-230 data logging pH/ORP meter.Features 0 to 14.00pH range Epoxy body with BNC connector 36" cable Includes bottle of storage..

A general-purpose pH sensing electrode measuring 12.3mm in diameter and 160mm in length, built with an epoxy body and a BNC connector on a 36-inch cab..

The REED PE-11 is a general-purpose pH electrode built with a PVC body and a single Ag/AgCl junction, measuring 10mm in diameter by 130mm in length. I..

This is the OEM replacement sensing element for REED's C-380 refrigerant leak detector, designed to restore detection sensitivity once the original se..

A double-insulated test lead set pairing one black and one red 48-inch flexible lead, each tipped with stainless-steel probes and shrouded 4mm banana ..

The REED R1000-KIT bundles a pair of safety-rated test leads with shrouded banana plugs and a pair of alligator clips with insulated covers, letting t..

A pair of heavy-duty test leads with built-in fuses for extra protection against overload while probing live circuits. The sharp stainless-steel tips ..

A pack of replacement fuses sized specifically for REED's R1020 and FC-300 fused test lead sets. Swapping in a fresh fuse after one blows restores the..

A basic pair of test leads with shrouded 4mm banana plugs, offered in both straight-end and right-angle styles to suit different meter connections. Ra..