Search

Desktop/wall-mount carbon monoxide monitor that simultaneously displays CO concentration, ambient temperature, relative humidity, and the time and dat..

Replacement temperature and humidity sensor probe for the REED R9905 indoor air quality meter, letting users restore accurate temp/RH readings on an e..

A plug-in replacement carbon monoxide sensing probe built for the REED R9910SD and SD-9901 air quality data loggers. Swaps in directly when the origin..

A replacement carbon dioxide probe compatible with the REED R9910SD and SD-9901 data logging air quality meters. Lets a technician restore CO2 measure..

The REED R9910SD-KIT is a data-logging indoor air quality meter capable of monitoring three probes at once, covering oxygen, CO2, carbon monoxide, tem..

An oxygen-sensing replacement probe made for the REED R9910SD and SD-9901 indoor air quality meters. Designed as a drop-in swap for a depleted or fail..

A combined temperature and humidity replacement probe for the REED R9910SD, SD-9901 and SD-3007 data logging air quality meters. Restores ambient temp..

A desktop/wall-mount indoor air quality meter built around a 7-inch color touchscreen and an NDIR CO2 sensor reading 0-9999 ppm with under-2-second re..

Built for continuous room monitoring, this unit reads CO2, temperature, and humidity on a 7-inch color touchscreen and uses a low-drift NDIR sensor to..

The REED R9930 is a handheld air particle counter that reports up to six particle size channels down to 0.3 microns, paired with a built-in still/vide..

A replacement 7.4V lithium battery pack sized and rated to match the power requirements of the REED R9930 air particle counter, for restoring runtime ..

A genuine replacement AC power adapter made specifically for the REED R9930 air particle counter, letting the meter run continuously or recharge witho..

The REED RINSPECT-KIT bundles the essential tools a home inspector needs in one case: an infrared thermometer, a dual moisture meter, a non-contact vo..

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

This is a genuine replacement daylight plate (lens cover) for REED's handheld refractometer series, designed to snap onto the sample-viewing prism of ..

A 16GB micro SD memory card bundled with a full-size SD adapter, purpose-built for REED SD-Series data loggers. Use it to expand or replace onboard st..

A European-standard 220V AC power adapter designed for REED SD-Series data loggers, converting 220/230V mains power to a regulated 9V DC output. It te..

A North American-standard 110V AC power adapter for REED SD-Series data loggers, stepping 120V mains power down to a regulated 9V DC supply. Fitted wi..

A 24-inch strip of reflective tape meant to be cut into small tabs and applied to a rotating shaft or component so a photo tachometer can pick up a cl..