Search

The R2960 is a Type K needle-tip probe with a slim hypodermic-style tip meant to pierce into food, rubber, gels and other soft solids for an internal ..

The R2970 is a bright yellow, spring-loaded pipe-clamp thermocouple probe designed to snap securely onto pipes and tubing up to about 1.4 in in diamet..

A spring-loaded Type K thermocouple probe built to clamp directly onto pipes up to about 1.4 in (35 mm) across, so technicians can log surface tempera..

The R2980 is a Type K air-temperature probe purpose-built for monitoring ovens, refrigerators, and freezers, with a stainless-steel shielded tip that ..

An air-temperature Type K probe purpose-built for ovens, walk-in coolers, and freezers, with a stainless-steel shield around the sensing tip so it rea..

The R2990 is a simple black K-Type adapter that converts a standard mini-connector thermocouple probe into dual shrouded banana-plug inputs, letting i..

The R3000SD-ATC is an Automatic Temperature Compensation probe designed to pair with REED's R3000SD and SD-230 data logging pH/ORP meters, improving r..

Building on the base kit, this configuration adds the R3000SD meter with its pH and ORP electrodes plus a pair of calibration buffer solutions (pH 4.0..

The REED R3000SD-ORP is a professional replacement ORP (oxidation-reduction potential) electrode built for the REED R3000SD and SD-230 data logging me..

A general-purpose pH electrode built for REED's R3000SD and SD-230 data logging pH/ORP meters. It uses a single Ag/AgCl junction housed in a PVC body ..

The REED R3002 is a compact digital manometer for gauge and differential pressure measurement up to 5 psi, with roughly 0.3% full-scale accuracy. It o..

The R3002-NIST is a compact digital manometer for gauge and differential pressure up to 5 psi, switchable across 11 pressure units including psi, kPa,..

Handheld pH/mV meter that reads pH or millivolts alongside temperature on a dual LCD display. Its microprocessor auto-recognizes standard buffer solut..

Genuine 110V AC/DC power adapter made for the REED R3525 pH/mV meter, letting it run continuously from a wall outlet instead of its internal 9V batter..

A combination pH electrode with a built-in temperature sensor, made as a direct replacement for the REED R3525 pH/mV meter. It terminates in a 1-meter..

Replacement ORP (oxidation-reduction potential) probe built for the REED R3525 pH/mV meter, terminating in a 1 m (39 in) cable for convenient reach in..

This REED R3525-Kit pairs a compact, cable-electrode pH/mV meter with pH 4.01 and 7.00 buffer solutions for calibration right out of the box. It reads..

The REED R3525-Kit2 builds on the standard kit by adding an AC power adapter, so the meter can run continuously without draining its battery during lo..

This is the same REED R3525 pH/mV meter body, but packaged as the KIT3 bundle for users who also need ORP and conductivity readiness out of the box. I..

The REED R3525 pairs a cabled pH/mV electrode with a compact meter body, suited to both handheld use and wall mounting. It auto-recognizes standard bu..