Search

The Muya G73006 is Simple carrier for use in tribrachs with optical plummet. Suitable for direct fitting of GNSS antennas or 5/8 screw fitting Circula..

The Muya G73007 Optical Plummet Twist Focus Tribrach is a high-quality tribrach featuring: An optical plummet and 2X magnification and a twist focusIt..

Suitable for TPS instruments with an angular accuracy of greater than 2". The footscrews have a large diameter which permits fine adjustment even when..

The G73009 is a laser-plummet tribrach with a focused laser dot for centring, a circular vial, and standard three-prong forced centering.

The G75001 is a black friction-top rotating adapter that mounts a 5/8-11 prism or GNSS receiver onto any Wild-type tribrach with plummet.

The G75002 is a rotating 5/8-11 tribrach adapter with a removable centre hub that can stay attached to the GPS receiver or prism for faster setup swap..

The G75003 is a friction-rotating 5/8-11 adapter letting the prism be re-aimed after it's already seated in the tribrach.

The G92003 is a metal-housed optical square using two glass pentaprisms to sight true right angles, used for staking lines, offsets, and curve layout.

The G92004 is a self-adhesive retroreflective target sheet, 50x50mm, with a diamond-prism reflective pattern and printed crosshair for precise total-s..

The G92005 is the same self-adhesive diamond-pattern retroreflective target with printed crosshair, sized down to 40x40mm for smaller or closer-range ..

The G92006 is a self-adhesive retroreflective target sheet, 30x30mm, with a diamond-prism reflective pattern and printed crosshair for precise total-s..

The Gain Flex UHF External Antenna (also commonly referred to as the Gainflex or GAT series) is a high-performance, flexible whip antenna designed spe..

The GDF21-BK is a Leica-style tribrach without an optical plummet, using three levelling screws and a circular bubble vial to seat instruments over a ..

The GDF22-BK is the same Leica-style tribrach design fitted with a built-in optical plummet for precise centring over a survey point.

The GH-A600 is a heavier 600g geological hammer with a pointed tip and flat striking face, and a shock-reduction grip.

The GH-B300 is a one-piece forged-steel geological hammer with a pointed tip on one end and a flat striking face on the other, fitted with a shock-abs..

The GH-B600 is a geological hammer with a pointed tip on one side and a flat/chisel-edge head on the other, 600g weight, with a shock-reduction grip, ..

The MUYA GM130 Ultrasonic Thickness Gauge is a rechargeable, USB-charging thickness gauge for one-sided, non-destructive measurement of metal thicknes..

A handheld digital thermocouple thermometer for technicians who need quick, accurate readings using a plug-in probe rather than a fixed sensor, spanni..

A dual-channel digital thermocouple thermometer that accepts K, J, T, E, N and R/S type sensor probes (sold separately), so one meter covers many diff..