Search

The ETT30A-230YL is a taller version of the yellow elevator aluminium tripod, with a geared centre column for fine height adjustment.

The G21013 is an aluminum contractor-grade tripod with a flat/triangle head and a quick-clamp dual-lock mechanism on telescoping square-tube legs, ext..

The G21018 is a heavy-duty fiberglass tripod with a large round instrument head and a dual-clamp lock, aimed at robotic total station and theodolite w..

The G21019 is a heavy-duty fiberglass tripod with a machined flat instrument head (5/8x11 mount) and a dual-lock leg system combining an upper quick c..

The G21022 is a compact aluminum mini-elevator tripod with round-tube telescoping legs and a quick-clamp lock, a shorter-range sibling to the standard..

The G21025 is an aluminum elevator tripod with a geared, telescoping centre column that lets the head be raised independently of the legs for fine hei..

The G21027 is an aluminum tripod with round-tube legs, a self-locking dual clamp, and a flat instrument head roughly 150mm across, anodized for lightw..

The G21030 is a compact aluminum mini-tripod with a flat/triangle head and quick-clamp lock, collapsing to about 22 inches, designed for low-height in..

The G21033-C is a fiberglass flat-head tripod with a precision-machined flat head and dual-clamp leg lock, resisting moisture and UV fading better tha..

The G22000 is a heavy-duty fiberglass tripod with a large round instrument head (about 150mm) and a dual-clamp lock, aimed at robotic total station an..

The G31001-FOB is the same 64mm silver-coated circular prism assembly as the YLB variant, differing only by canister colour and order code, with an an..

The G31001-YLB is a 64mm silver-coated circular prism in a tilting anodized-aluminum holder with 0/-30mm offset, fitting any 5/8-11 pole, with a rear-..

The G31020 is a 25.4mm mini prism in an anodized-aluminum/brass tilting holder, with 0/-30mm offsets and a side-mounted levelling vial, including an s..

This is a G33100 aluminum pole extension, 25mm outer diameter, 25cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 50cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 100cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 180cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

A precision aluminium bubble vial assembly (32mm outer diameter) used as a replacement part in a survey instrument's circular level.

The G33506 is an aluminum vial assembly, 38mm outer diameter, a clip-on circular level bubble unit used to check a survey pole is held vertical during..

The G35001 is a two-leg aluminum support stand for prism poles, GPS/GNSS rover rods, and total-station rods, using a thumb-release clamp on telescopin..