Search

This data-logging meter tracks up to three indoor air quality parameters at once, covering oxygen, carbon dioxide, carbon monoxide, temperature, and h..

An oxygen-sensing replacement probe made for the REED R9910SD and SD-9901 indoor air quality meters. Designed as a drop-in swap for a depleted or fail..

A combined temperature and humidity replacement probe for the REED R9910SD, SD-9901 and SD-3007 data logging air quality meters. Restores ambient temp..

The REED RINSPECT-KIT bundles the essential tools a home inspector needs in one case: an infrared thermometer, a dual moisture meter, a non-contact vo..

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

A North American-standard 110V AC power adapter for REED SD-Series data loggers, stepping 120V mains power down to a regulated 9V DC supply. Fitted wi..

A 24-inch strip of reflective tape meant to be cut into small tabs and applied to a rotating shaft or component so a photo tachometer can pick up a cl..

This heated semiconductor gas sensor detects gasoline, propane, natural gas or fuel oil. For use it with the REED C-383 combustible gas detector.

A higher-capacity version of REED's SD-series force gauge, recording push and pull forces up to 220 lb (100 kg) with the same reversible-display desig..

This is a genuine REED replacement load cell sensor for the SD-6100 Data Logging Force Gauge, intended to restore or replace the force-sensing element..

The REED SD-6100-NIST is the higher-capacity sibling of the SD-6020, measuring push and pull forces up to 100 kg (220 lb) with a 4-digit backlit LCD t..

The SinoGNSS A100 Pro is a compact, palm-sized smart antenna that combines a full-constellation, multi-frequency GNSS module, an integrated gyroscope,..

The C100 is a reflectorless total station built for coordinate, angle, and traverse survey work with prism-free ranging.

The SinoGNSS HYD10 is a portable, IP67-rated single-beam echo sounder weighing about 1.2 kg, using a 200 kHz transducer to measure depths from 0.3 to ..

A palm-sized, wearable multi-constellation GNSS receiver with a built-in antenna, designed to be worn on an armband, helmet or safety vest for personn..

The SinoGNSS XE100 is ComNav's 3D machine-guidance kit for excavators, pairing dual GNSS antennas with boom, stick, bucket and body-mounted inclinomet..

The XE100 is a machine guidance system pairing a GNSS receiver with an in-cab display, mounted on excavators for real-time grading and digging guidanc..