Search

The TC-8-19 is an adjustable claw-type cradle bracket that grips a handheld data collector and locks onto a survey pole, sized for the Unistrong P9.

The Uniwoay C003H is a compact wired vehicle GPS tracker module with a multi-pin wiring harness for hard-wiring into a vehicle's power and ignition ci..

This WiFi borescope camera lets you inspect pipes, engine bays, walls, and other tight or hidden spaces by streaming live video straight to a smartpho..

The WT83B is a compact humidity and temperature meter for environmental monitoring, covering -20C to 70C and 0-100% RH with tight +/-0.5C/+/-2.0% RH a..

The X2020-100M is a 100m open-reel fiberglass long tape with a fast-rewind crank handle, built for lightweight, non-conductive measuring over long dis..

The X2020-50M is a 50m open-reel fiberglass long tape with a fast-rewind crank handle, built for lightweight, non-conductive measuring over long dista..

This handheld digital stroboscope uses a flashing xenon lamp to visually freeze the motion of rotating or reciprocating machinery, letting technicians..

The REED K4020-NIST is a digital xenon stroboscope for non-contact speed measurement of rotating equipment such as fans, motors, pumps and centrifuges..

This type k male connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-181 is rated up 425°F (250°C) and i..

This type k female connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-182 is rated up 425°F (250°C) and..

For use with the REED SD-230 data logging pH/ORP meter.Features 0 to 14.00pH range Epoxy body with BNC connector 36" cable Includes bottle of storage..

A general-purpose pH sensing electrode measuring 12.3mm in diameter and 160mm in length, built with an epoxy body and a BNC connector on a 36-inch cab..

The REED PE-11 is a general-purpose pH electrode built with a PVC body and a single Ag/AgCl junction, measuring 10mm in diameter by 130mm in length. I..

The REED R1640-KIT2 pairs the 2-channel Bluetooth Smart Series thermocouple thermometer with four different Type-K probe styles -- surface, air/gas, i..

The REED R1640-KIT3 combines the 2-channel Bluetooth Smart Series thermocouple thermometer with a pair of Type-K air probes built for monitoring ambie..

This HVAC/R-focused kit bundles REED's Bluetooth Smart Series vane anemometer, thermo-hygrometer, and thermocouple thermometer with a pair of Type K s..

The REED R2400 is a single-input Type K thermocouple thermometer covering -50 to 1300C (-58 to 2000F), with a backlit LCD that can display readings in..

The REED R2400-NIST is a single-input Type-K thermocouple thermometer with a large backlit LCD, measuring -58 to 2000F (-50 to 1300C) with selectable ..

The R2450SD-Kit4 combines the data logging thermometer with four different Type K probe styles (surface, air/gas, immersion, and needle-tip) to handle..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..