Search

The RC200 is a remote control unit used to adjust a rotary laser's settings from a distance, saving trips back to the instrument during levelling work..

The RC300 is a digital remote control with a screen readout, used to adjust and monitor a rotary laser's settings from a distance.

The TC-6 is an adjustable claw-cradle holder, sized for Recon/Archer/Geta 535 handhelds (72-92mm width, 30mm height).

A dedicated benchtop test stand built to hold REED's SD-6020 and SD-6100 force gauges steady during tension and compression testing. Manual lever oper..

This reference leak source is a calibration accessory for REED's C-380 refrigerant leak detector (also compatible with the C-383 and R9300), used to v..

A handheld thermal imaging camera with a 160x120 (19,200-pixel) sensor covering -10C to 400C, shown on a 2.8 in color screen with a choice of five pal..

The REED R2160-Kit pairs the R2160 thermal imaging camera with a rugged hard carrying case featuring a custom-cut foam insert. The camera's 160x120 in..

This combo kit bundles the REED R2160 thermal imaging camera (160x120 IR sensor, -10 to 400C range) with the R6250SD data-logging heat stress meter, w..

Same 160x120 thermal imaging hardware as the standard R2160 -- IP65 housing, 2.8 in color display, five color palettes, -10C to 400C range -- but supp..

A genuine replacement lens cover for the Reed R2160 instrument, protecting its optical sensor.

A two-piece REED R5320 kit pairing a wire-tracing transmitter with a handheld receiver, built for locating and testing RJ11/RJ45 and other unpowered c..

The REED R5500 is a 3-in-1 electrical tool that combines a circuit breaker finder, a receptacle wiring tester, and a GFCI tester in one kit. Plug the ..

A genuine replacement 9mm camera head for the REED R8500 video inspection system, featuring a waterproof (IP67) housing, a 1-meter gooseneck cable, an..

The REED R9000-RCH is an OEM replacement camera head for the R9000 pipe inspection system, featuring the same 23mm waterproof (IP67) housing and LED r..

The REED R9000-RCV is a handheld 512Hz locating receiver that pairs with the R9000-CAMT transmitter camera head to pinpoint a pipe camera's exact posi..

A handheld digital force gauge that measures push and pull loads up to 44 lb (20 kg) with a reversible display for easy reading in either testing dire..

The REED SD-6020-NIST is a data-logging push/pull force gauge with a 20 kg (44 lb) capacity and a reversible display that stays readable no matter whi..

A higher-capacity version of REED's SD-series force gauge, recording push and pull forces up to 220 lb (100 kg) with the same reversible-display desig..

The REED SD-6100-NIST is the higher-capacity sibling of the SD-6020, measuring push and pull forces up to 100 kg (220 lb) with a 4-digit backlit LCD t..

The REED WG-01 Wedge Grip is an accessory attachment for compatible REED force gauges, holding flat or sheet-like test material securely in place duri..