Search

The R2930 is a 90-degree right-angle version of REED's Type K surface probe, letting the sensor tip contact a flat surface or duct wall while the hand..

Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts.Features: Measurement range: -58 to 1652°F (-50 to..

The R2940 is a Type K air/gas probe with a perforated stainless-steel shield around the sensing tip, designed to measure moving air and gas streams su..

This Type K immersion thermocouple probe measures temperatures from -50C to 600C (-58F to 1112F) with a response time under 2 seconds. It has a roughl..

The R2950 is a Type K immersion/general-purpose probe intended for dipping into liquids such as water, oils and non-corrosive fluids, with a straight ..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

The R2960 is a Type K needle-tip probe with a slim hypodermic-style tip meant to pierce into food, rubber, gels and other soft solids for an internal ..

The R2970 is a bright yellow, spring-loaded pipe-clamp thermocouple probe designed to snap securely onto pipes and tubing up to about 1.4 in in diamet..

A spring-loaded Type K thermocouple probe built to clamp directly onto pipes up to about 1.4 in (35 mm) across, so technicians can log surface tempera..

The R2980 is a Type K air-temperature probe purpose-built for monitoring ovens, refrigerators, and freezers, with a stainless-steel shielded tip that ..

An air-temperature Type K probe purpose-built for ovens, walk-in coolers, and freezers, with a stainless-steel shield around the sensing tip so it rea..

A palm-sized water quality meter with a dual-panel backlit LCD that logs pH readings from 0.00 to 14.00 and ORP readings up to +/-1999 mV directly ont..

The R3000SD-ATC is an Automatic Temperature Compensation probe designed to pair with REED's R3000SD and SD-230 data logging pH/ORP meters, improving r..

The most complete R3000SD package, combining the meter, pH electrode, ORP electrode, and an ATC temperature probe for automatic compensation, along wi..

This REED R3000SD data-logging meter reads pH from 0 to 14 and ORP up to 1999 mV, with automatic temperature compensation and a backlit dual display f..

Replacement sensor probe for REED's R3100SD and SD-4307 data logging conductivity meters, sized at about 22mm diameter by 128.5mm length. It picks up ..

This vane thermo-anemometer logs air velocity (0.4-30 m/s), ambient temperature, and contact temperature via a Type J/K thermocouple input directly on..

This REED R4000SD-Kit combines a data-logging vane thermo-anemometer with a 16GB SD card and AC power adapter, letting technicians capture and store a..

The REED R4000SD-Kit2 adds a tripod to the standard data-logging vane anemometer kit, making it easy to set up for unattended, long-term air velocity ..

This vane thermo-anemometer logs air velocity (0.4-30 m/s), ambient temperature, and contact temperature via a Type J/K thermocouple input directly on..