Search

A machined stub adapter that screws onto a tribrach and lets a GNSS antenna or prism carrier be quickly mounted and removed, Topcon-style with a 5/8"-..

A rotating Leica-style adapter with a built-in optical plummet for centering over a survey point, stainless-steel 5/8"-11 thread base, and a small tub..

The FDJ01-BK is the same style of black three-screw levelling tribrach as the FDJ01D-BK, but without the plummet sight, a simpler lower-cost base.

The FDJ01D-BK is a black anodized three-screw Topcon-style tribrach with a built-in centering-plummet sight and calibrated circular vial, letting a su..

The FG01N is a small stainless-steel prism/GPS pole adapter with a 5/8-11 male thread and a rubberized base collar, used to connect a GNSS antenna or ..

The FG01S is a removable rotating adapter with a 5/8-11 brass thread, used for mounting a GPS receiver, prism, or target onto a tribrach or tripod.

The FG01TP is a rotating tribrach adapter with a 5/8-11 thread and brass locking knob, letting a prism or GPS pole rotate freely once mounted on a tri..

The G31001-FOB is the same 64mm silver-coated circular prism assembly as the YLB variant, differing only by canister colour and order code, with an an..

The G31001-YLB is a 64mm silver-coated circular prism in a tilting anodized-aluminum holder with 0/-30mm offset, fitting any 5/8-11 pole, with a rear-..

Muya G31003 Features a 64mm copper-coated prism, has a

The G31020 is a 25.4mm mini prism in an anodized-aluminum/brass tilting holder, with 0/-30mm offsets and a side-mounted levelling vial, including an s..

The G31022 is a 25.4mm sliding mini-prism system on a 4-section aluminum pin-pole set extending to 1.8m, with a stainless hanging hook and height/tilt..

The G31026 is a Leica-style 25.4mm mini prism in a polymer holder with 1/4 inch thread fittings and a built-in circular bubble, on a 4-section pin pol..

The G33002-10 is a quick-change fiberglass prism pole with a fixed tip, extending from 1.5 to 2.6m, a lighter-weight non-conductive alternative to the..

The G33002-20 is a quick-change fiberglass prism pole with a fixed tip, extending from 1.5 to 3.6m, a lighter-weight non-conductive alternative to the..

The G33002-30 is a quick-change fiberglass prism pole with a fixed tip, extending from 1.65 to 4.65m, a lighter-weight non-conductive alternative to t..

The G33008-10 is a quick-change aluminum prism pole with a fixed tip, extending from 1.5 to 2.6m, used to carry a total-station prism at a controlled ..

The G33008-20 is a quick-change aluminum prism pole with a fixed tip, extending from 1.5 to 3.6m, for taller prism setups.

The G33008-30 is a quick-change aluminum prism pole with a fixed tip, extending from 1.65 to 4.65m, for the tallest prism setups in this range.

The G33011 is a compact 39cm aluminum mini prism pole with a fixed 5/8-11 tip and an adjustable vial for quick levelling, unmarked shaft, ships with a..