Search

The REED R5300 is a lightweight continuity tester built for tracing and verifying cables and wire runs up to 10,000 feet long, using color-coded LED f..

A two-piece REED R5320 kit pairing a wire-tracing transmitter with a handheld receiver, built for locating and testing RJ11/RJ45 and other unpowered c..

A handheld tester that measures cable length (up to roughly 100,000 feet / 30km) and low resistance by sending a pulse down the conductor and calculat..

The same pulse-reflection cable length and resistance tester as the standard R5340 -- up to about 100,000 feet of range, 20 preset plus 8 user-defined..

The R5408 is a resistance decade box used for prototyping and testing circuits, offering 7 switch-selectable decade ranges spanning roughly 1 ohm up t..

This is the same REED R5408 resistance decade box -- 7 switch-selectable decade ranges from 1 ohm to roughly 11.1 megohms in 1-ohm steps, with slide s..

The REED R5500 is a 3-in-1 electrical tool that combines a circuit breaker finder, a receptacle wiring tester, and a GFCI tester in one kit. Plug the ..

The REED R5600 combines an insulation resistance meter and general multimeter in one rugged, double-molded housing. It offers test voltages of 250V, 5..

The REED R5600 is a combination insulation tester (megohmmeter) and multimeter that tests insulation resistance at 250V, 500V, and 1000V test voltages..

A replacement kickstand made specifically for the REED R5600 insulation tester, letting the meter stand upright on a bench or work surface for hands-f..

The REED R5700 is a clamp-on ground resistance tester that measures earth resistance and leakage current without needing auxiliary ground spikes, maki..

A clamp-style ground resistance tester that measures earth resistance and leakage current without needing auxiliary ground stakes, letting a single ea..

The REED R5710 is a clamp-on earth ground resistance tester that measures ground resistance without needing auxiliary ground stakes, using auto-rangin..

Identical hardware to the standard R5720 leakage clamp meter -- True RMS AC sensing from microamp to 100A range, a 1.26-inch jaw, low-pass filtering f..

This bench simulator sources precise DC voltage (0 to 11V, 1mV resolution) and DC current (0 to 20mA, 0.001mA resolution) signals for testing and cali..

The REED R5805-NIST is a handheld voltage and current source used to bench-test meters, controllers, and sensor loops. It outputs roughly -1 to 11V DC..

This is the NIST-traceable version of Reed's R5820 loop calibrator, delivered with a certificate of calibration for documented accuracy in regulated o..

The REED R5825-NIST is the same rugged loop calibrator used to source, simulate, and measure 4-20mA current loops, complete with a 24V internal loop s..

This NIST-certified edition of the Reed R5850 multifunction calibrator ships with a traceable calibration certificate for compliance-driven facilities..

A magnetic hanging strap that lets you mount a compatible REED meter to any steel surface, freeing up both hands while testing. Officially listed as c..