Search
Reed Tm-8811-kit Thickness Gauge with 5-step Calibration Block
Bundles the REED TM-8811 ultrasonic thickness gauge with a steel 5-step calibration block marked in both imperial and metric scales, letting technicia..
Reed Tm-8811-nist Thickness Gauge, Ultrasonic, 0.05/7.9", 1.5/200mm W/nist Cert
Same ultrasonic thickness gauge platform as the standard TM-8811, measuring 0.05-7.9 in (1.5-200mm) across ten preset material types with automatic ca..
Reed Tm-8811probe Replacement Probe for Tm-8811 Thickness Gauge
Replacement ultrasonic probe for the REED TM-8811 series thickness gauges, for when the original probe wears out or is damaged. Drop-in compatible wit..
Reed Tp-01 Beaded Wire Probe, Type K, -40/482f, -40/250c
The REED TP-01 is a Type K beaded thermocouple wire probe rated for -40 to 250C (-40 to 482F). It has a roughly 38-inch (96.5 cm) lead wire, color-cod..
Reed Tp-01-nist Beaded Wire Probe, Type K, -40/482°f, -40/250°c W/nist Cert
A basic beaded-tip Type K wire probe intended for everyday spot-checks with any Type K meter or thermometer, color-coded per ANSI thermocouple convent..
Reed Tp-07 Probe, Atc for Sd-230
This Automatic Temperature Compensation (ATC) probe connects to the SD-230 pH/ORP Datalogger for increased accuracy.
Reed Tp-r01 Probe, Replacement Rtd for C-370
The TP-R01 is a genuine Reed Instruments replacement PT100 RTD temperature probe made specifically for the Reed C-370 RTD thermometer. It swaps in dir..
Reed-inspect-kit Home Inspection Kit
A grab-and-go inspection bundle built for home inspectors and DIY buyers, combining an infrared thermometer, a digital psychrometer, pinless and pin-t..
Reed-wb 1/2" Windshield Ball for Sound Level Meters
A compact acoustic foam ball windshield sized for 1/2 in microphones, designed to slip over a sound level meter's mic capsule to cut wind noise and br..
Rise Fall Method Survey Book
The MRF is a hardcover field level book ruled for the Rise and Fall booking method, with columns for back sight, intermediate sight, fore sight, rise,..
SinoGnss A100 Pro Smart Antenna for AG501 Pro Autosteer System
The SinoGNSS A100 Pro is a compact, palm-sized smart antenna that combines a full-constellation, multi-frequency GNSS module, an integrated gyroscope,..
Sinognss A300 Gnss Antennae
The SinoGNSS A300 is a compact, all-in-one GNSS receiver that combines antenna, GNSS module and communication electronics inside a single sealed dome,..
SinoGnss AG501 Pro Autosteer System
The AG501 Pro is ComNav's autosteer kit for precision agriculture, built around the A100 Pro smart antenna that combines a GNSS receiver, gyroscope an..
Sinognss At350 Mini-choke Ring Antennae
A compact choke-ring GNSS antenna covering GPS, GLONASS, BeiDou, Galileo and SBAS signal bands, with the concentric ring design that suppresses multip..
Sinognss At360 Geodetic Antenna
A full-constellation, triple-frequency survey antenna that tracks GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS, SBAS and L-Band signals for precise posi..
Sinognss At600 3d Gnss Choke Ring Antennae
The AT600 is ComNav's full-performance choke ring GNSS antenna, built around a 3D choke-ring ground plane that rejects multipath signal reflections fo..
Sinognss Bar Battery
A rechargeable bar-style battery pack used to power a SinoGNSS GNSS receiver in the field.
Sinognss Bracket with Holder for Tablet
A pole-clamp holder with adapter for mounting a tablet or field controller onto a survey pole.
SinoGNSS C100 Total Station
The C100 is a reflectorless total station built for coordinate, angle, and traverse survey work with prism-free ranging.
