Search

The G31001-FOB is the same 64mm silver-coated circular prism assembly as the YLB variant, differing only by canister colour and order code, with an an..

The G31001-YLB is a 64mm silver-coated circular prism in a tilting anodized-aluminum holder with 0/-30mm offset, fitting any 5/8-11 pole, with a rear-..

Muya G31003 Features a 64mm copper-coated prism, has a

The G31020 is a 25.4mm mini prism in an anodized-aluminum/brass tilting holder, with 0/-30mm offsets and a side-mounted levelling vial, including an s..

The G31022 is a 25.4mm sliding mini-prism system on a 4-section aluminum pin-pole set extending to 1.8m, with a stainless hanging hook and height/tilt..

The G31026 is a Leica-style 25.4mm mini prism in a polymer holder with 1/4 inch thread fittings and a built-in circular bubble, on a 4-section pin pol..

The G31039 is a Leica-style premier circular prism, anti-reflex coated and mounted in a black metal holder with a removable target plate for fine sigh..

The G33002-10 is a quick-change fiberglass prism pole with a fixed tip, extending from 1.5 to 2.6m, a lighter-weight non-conductive alternative to the..

The G33008-10 is a quick-change aluminum prism pole with a fixed tip, extending from 1.5 to 2.6m, used to carry a total-station prism at a controlled ..

This is a G33100 aluminum pole extension, 25mm outer diameter, 25cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 50cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 100cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 180cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

The G35010 is a compact aluminum two-leg mini bipod scaled for mini prism poles, about 25cm tall, a low-profile support for short-range/close survey s..

The G51018 is a bubble-level vial mounted in a snap-on holder that clips around a 32mm OD pole, giving a quick visual plumb check on prism or GPS pole..

The G51019 is a die-cast aluminium rod-level clamp with an adjustable 20-minute vial, clipping onto round/rectangular rods for levelling staffs or pri..

The Muya G61001 Rover Rod is 2.2m in length, One-section, Black in colorThese rods are made of high strength carbon fiber, which is more lighter.Twist..

The Muya G61002 Rover Rod is 3.6m in length, Two-section, Black in colorThese rods are made of high strength carbon fiber, which is more lighter.Twist..

The G61006 is a two-piece 100% carbon-fiber rover pole built with dry-wound filament construction for a high strength-to-weight ratio, fitted with a f..

The Muya G61006A GNSS Rover Rod is made of Aluminum Material.These two-piece GNSS rover rods with fixed height at 2 meters.Features fixed 5/8 11 tip a..