Search

This REED R2930 is a Type K right-angle surface thermocouple probe designed to measure temperatures on flat surfaces and inside hard-to-reach areas su..

The R2930 is a 90-degree right-angle version of REED's Type K surface probe, letting the sensor tip contact a flat surface or duct wall while the hand..

Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts.Features: Measurement range: -58 to 1652°F (-50 to..

The R2940 is a Type K air/gas probe with a perforated stainless-steel shield around the sensing tip, designed to measure moving air and gas streams su..

This Type K immersion thermocouple probe measures temperatures from -50C to 600C (-58F to 1112F) with a response time under 2 seconds. It has a roughl..

The R2950 is a Type K immersion/general-purpose probe intended for dipping into liquids such as water, oils and non-corrosive fluids, with a straight ..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

The R2960 is a Type K needle-tip probe with a slim hypodermic-style tip meant to pierce into food, rubber, gels and other soft solids for an internal ..

The R2980 is a Type K air-temperature probe purpose-built for monitoring ovens, refrigerators, and freezers, with a stainless-steel shielded tip that ..

An air-temperature Type K probe purpose-built for ovens, walk-in coolers, and freezers, with a stainless-steel shield around the sensing tip so it rea..

This bundle pairs the R3000SD data-logging pH/ORP meter with a general-purpose pH electrode and a dedicated ORP electrode, ready to start testing out ..

Building on the base kit, this configuration adds the R3000SD meter with its pH and ORP electrodes plus a pair of calibration buffer solutions (pH 4.0..

The most complete R3000SD package, combining the meter, pH electrode, ORP electrode, and an ATC temperature probe for automatic compensation, along wi..

The REED R3000SD-ORP is a professional replacement ORP (oxidation-reduction potential) electrode built for the REED R3000SD and SD-230 data logging me..

A general-purpose pH electrode built for REED's R3000SD and SD-230 data logging pH/ORP meters. It uses a single Ag/AgCl junction housed in a PVC body ..

The REED R3001 combines a pitot-tube anemometer and differential manometer in one instrument, measuring air velocity up to 80 m/s alongside differenti..

A dual-function pitot-tube anemometer and differential manometer that reads air velocity up to 80 m/s and differential pressure to +/-5000 Pa on a bac..

This pH electrode measures 0 to 14 pH and is compatible with the REED R3500 pH Meter.

A combination pH electrode with a built-in temperature sensor, made as a direct replacement for the REED R3525 pH/mV meter. It terminates in a 1-meter..

Replacement ORP (oxidation-reduction potential) probe built for the REED R3525 pH/mV meter, terminating in a 1 m (39 in) cable for convenient reach in..