Search

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

A European-standard 220V AC power adapter designed for REED SD-Series data loggers, converting 220/230V mains power to a regulated 9V DC output. It te..

The SD-230-Kit2 bundles REED's SD-230 data-logging meter with a PE-11 pH electrode and an ORP-14 ORP electrode. It measures pH from 0.00-14.00 and ORP..

A handheld digital force gauge that measures push and pull loads up to 44 lb (20 kg) with a reversible display for easy reading in either testing dire..

A genuine replacement load cell for the Reed SD-6020 instrument, the internal sensor that measures applied force/weight.

The REED SD-6020-NIST is a data-logging push/pull force gauge with a 20 kg (44 lb) capacity and a reversible display that stays readable no matter whi..

A vibration meter and data logger that tracks machinery velocity and acceleration to flag abnormal vibration levels, measuring per ISO 2954 with RMS, ..

This genuine REED replacement vibration probe restores full functionality to your SD-8205 Vibration Meter/Data Logger once the original wears out or i..

A step-up electrician's kit centered on a true-RMS waterproof digital multimeter paired with an AC current adapter for current measurements, plus a th..

Ultrasonic thickness gauge for non-destructive wall-thickness checks on steel, aluminum, copper, and various plastics, covering 0.05-7.9 in (1.5-200mm..

Same ultrasonic thickness gauge platform as the standard TM-8811, measuring 0.05-7.9 in (1.5-200mm) across ten preset material types with automatic ca..

The REED TP-01 is a Type K beaded thermocouple wire probe rated for -40 to 250C (-40 to 482F). It has a roughly 38-inch (96.5 cm) lead wire, color-cod..

A basic beaded-tip Type K wire probe intended for everyday spot-checks with any Type K meter or thermometer, color-coded per ANSI thermocouple convent..

This Automatic Temperature Compensation (ATC) probe connects to the SD-230 pH/ORP Datalogger for increased accuracy.

A compact acoustic foam ball windshield sized for 1/2 in microphones, designed to slip over a sound level meter's mic capsule to cut wind noise and br..

The C200 is a higher-end manual total station offering longer range and greater accuracy than the C100.

The SinoGNSS DS3-SN32 is an automatic (self-levelling) optical level used to establish and check horizontal reference lines during levelling surveys.

The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..