Search

TRU35 is a high-power, small-size, half-duplex digital radio model which is designed using advanced32-bit cortex M4 microcontroller technology, wirele..

An external radio interconnect cable that links a FOIF GNSS receiver to an external UHF radio and battery for extended-range RTK base station transmis..

The GH-A300 is a one-piece forged steel geological hammer with a flat striking face on one side and a curved pick point on the other, 300g head weight..

A UHF radio antenna built for the FOIF QT450A external radio modem, used to transmit or receive RTK correction signals between a GNSS base station and..

This is a roughly 300mm rubber-duck whip antenna with an SMA male connector, covering the 457-467MHz UHF band for GNSS radio links.

GoSLAM's UAV mounting kit attaches a compatible scanner underneath a drone airframe such as the DJI M350 for aerial LiDAR mapping.

The GoSLAM M40 is a lightweight handheld mobile mapping scanner using fixed-LiDAR SLAM technology, rated for a 70m scan radius and roughly 1cm accurac..

This is the M40 body fitted with an integrated RTK positioning module, adding survey-grade absolute georeferencing to the same 70m-range handheld LiDA..

The T100i extends the T-series design to a 120m scanning radius while keeping roughly 1cm point accuracy, using laser-SLAM so it needs no external GNS..

The Pro variant of the T100i adds an 8K HDR panoramic colour camera and survey-grade true-colour point cloud output on top of the same 120m-range scan..

The T300i Pro is GoSLAM's long-range flagship, with 32 laser lines, a 300m scanning distance, 640,000 pts/sec speed, roughly 1cm accuracy, plus a buil..

The GoSLAM T50i is a portable mobile scanner with a rotating laser probe rated to a 50m radius at about 1cm accuracy, paired with a colour touchscreen..

The GoSLAM X1 is a compact, collision-resistant drone-mounted LiDAR unit built for flying 3D laser scans through narrow, hard-to-reach spaces, streami..

The 2016C-30M is the same carbon-steel oil gauging tape and brass plumb-bob design, wound to a 30m length for mid-size tank dipping.

A small circular bubble vial in a clear plastic disc housing, sized to fit a 30-inch/2mm-sensitivity mount.

A generic 30"/2mm-sensitivity tube bubble vial, a common replacement size fitting a range of tribrachs and adapters.

A telescoping aluminum barcode staff designed as the companion rod for the DAL32 digital level, with alternating black-and-white barcode graduations t..

The matching aluminum barcode staff accessory for the DAL32A digital level, identical telescoping-staff design to the DAL32 staff since both levels sh..

The AKZ30 is a tilting triple-prism assembly: three 62mm copper-coated prisms in canisters on a polycarbonate mount, aluminum holder with 5/8-11 threa..