Search

Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts.Features: Measurement range: -58 to 1652°F (-50 to..

The R2940 is a Type K air/gas probe with a perforated stainless-steel shield around the sensing tip, designed to measure moving air and gas streams su..

This Type K immersion thermocouple probe measures temperatures from -50C to 600C (-58F to 1112F) with a response time under 2 seconds. It has a roughl..

The R2950 is a Type K immersion/general-purpose probe intended for dipping into liquids such as water, oils and non-corrosive fluids, with a straight ..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

The R2960 is a Type K needle-tip probe with a slim hypodermic-style tip meant to pierce into food, rubber, gels and other soft solids for an internal ..

The R2970 is a bright yellow, spring-loaded pipe-clamp thermocouple probe designed to snap securely onto pipes and tubing up to about 1.4 in in diamet..

A spring-loaded Type K thermocouple probe built to clamp directly onto pipes up to about 1.4 in (35 mm) across, so technicians can log surface tempera..

The R2980 is a Type K air-temperature probe purpose-built for monitoring ovens, refrigerators, and freezers, with a stainless-steel shielded tip that ..

An air-temperature Type K probe purpose-built for ovens, walk-in coolers, and freezers, with a stainless-steel shield around the sensing tip so it rea..

A palm-sized water quality meter with a dual-panel backlit LCD that logs pH readings from 0.00 to 14.00 and ORP readings up to +/-1999 mV directly ont..

The R3000SD-ATC is an Automatic Temperature Compensation probe designed to pair with REED's R3000SD and SD-230 data logging pH/ORP meters, improving r..

This bundle pairs the R3000SD data-logging pH/ORP meter with a general-purpose pH electrode and a dedicated ORP electrode, ready to start testing out ..

Building on the base kit, this configuration adds the R3000SD meter with its pH and ORP electrodes plus a pair of calibration buffer solutions (pH 4.0..

The most complete R3000SD package, combining the meter, pH electrode, ORP electrode, and an ATC temperature probe for automatic compensation, along wi..

This REED R3000SD data-logging meter reads pH from 0 to 14 and ORP up to 1999 mV, with automatic temperature compensation and a backlit dual display f..

The REED R3000SD-ORP is a professional replacement ORP (oxidation-reduction potential) electrode built for the REED R3000SD and SD-230 data logging me..

A general-purpose pH electrode built for REED's R3000SD and SD-230 data logging pH/ORP meters. It uses a single Ag/AgCl junction housed in a PVC body ..

Replacement sensor probe for REED's R3100SD and SD-4307 data logging conductivity meters, sized at about 22mm diameter by 128.5mm length. It picks up ..

This pH electrode measures 0 to 14 pH and is compatible with the REED R3500 pH Meter.