Search

The REED R5825-NIST is the same rugged loop calibrator used to source, simulate, and measure 4-20mA current loops, complete with a 24V internal loop s..

The Reed R5850 is a rugged multifunction process calibrator that both sources and measures volts, mA, ohms, frequency, and a wide range of thermocoupl..

This NIST-certified edition of the Reed R5850 multifunction calibrator ships with a traceable calibration certificate for compliance-driven facilities..

Pairs a dual-display thermo-hygrometer with 33% and 75% humidity calibration standards, letting users verify and maintain measurement accuracy in the ..

A handheld vibration meter that tracks both velocity and acceleration on rotating machinery, built to ISO 2954 standards. It logs up to 99 readings au..

Complete kit build of the R7000SD data logging vibration meter, bundling the meter with a vibration probe, a 16GB SD memory card, an AC power adapter ..

Data logging vibration meter that captures both velocity and acceleration readings from rotating machinery such as motors, pumps, fans and bearings, h..

This compact replacement vibration probe is designed for REED's R7000SD and SD-8205 data-logging vibration meters, sensing acceleration over roughly a..

The REED R7010 is a handheld vibration meter for diagnosing motors, bearings, pumps, and other rotating machinery, displaying acceleration, velocity, ..

This is the REED R7010-RTIP replacement probe set for the R7010 Vibration Meter, providing both a short and a long stainless steel contact tip to swap..

The R7900-KIT bundles the standard Reed R7900 ultrasonic thickness gauge with Reed's R9060 five-step steel calibration block, which carries both imper..

This all-in-one kit pairs the REED R8050 dual-range sound level meter with the R8090 acoustic calibrator, so you can verify your readings are accurate..

This kit pairs the REED R8050 dual-range Type 2 sound level meter with the REED R8090 acoustic calibrator, packaged together in a hard, laser-cut foam..

This all-in-one kit pairs a REED R8080 data-logging sound level meter with a matching R8090 acoustic calibrator, so you can measure noise levels and v..

This kit bundles the REED R8080 data-logging sound level meter with the REED R8090 acoustic calibrator in a rugged, custom-foam hard case, plus a wind..

This sound calibrator generates a stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter. The..

The REED R8090 is a compact acoustic calibrator used to field-verify sound level meters before and after noise surveys, generating a steady reference ..

This kit pairs the REED 8706 digital psychrometer/thermo-hygrometer with a set of 33% and 75% humidity calibration standards, so users can verify and ..

A compact voltage/current calibrator that both sources and measures mV and mA signals, including the ability to power and read a two-wire current loop..

A calibration/verification kit for coating thickness gauges, supplying a calibration iron piece, a calibration aluminum piece, and reference foil film..