Search

This portable ammonia gas detector uses a built-in sampling pump and telescopic probe to draw in air, displaying concentration readings on a 2.8-inch ..

A handheld carbon monoxide meter that reads CO concentration from 1 to 1000 ppm alongside ambient temperature on a backlit LCD. Includes a user-adjust..

Handheld carbon monoxide meter with a stabilized electrochemical sensor covering 1 to 1000 ppm alongside an ambient temperature readout from -4 to 158..

A desktop/wall-mount monitor that simultaneously displays carbon monoxide (0-999 ppm), relative humidity (10-90% RH), temperature (0-50C), and the tim..

An AC mains power adapter for the REED R9450 carbon monoxide monitor (also compatible with the R6200), letting it run continuously off wall power inst..

Desktop/wall-mount carbon monoxide monitor that simultaneously displays CO concentration, ambient temperature, relative humidity, and the time and dat..

The REED R9905-KIT is a data-logging indoor air quality meter that simultaneously tracks CO2, temperature, and relative humidity on a triple LCD reado..

A replacement carbon dioxide probe compatible with the REED R9910SD and SD-9901 data logging air quality meters. Lets a technician restore CO2 measure..

A vibration meter and data logger that tracks machinery velocity and acceleration to flag abnormal vibration levels, measuring per ISO 2954 with RMS, ..

Ultrasonic thickness gauge for non-destructive wall-thickness checks on steel, aluminum, copper, and various plastics, covering 0.05-7.9 in (1.5-200mm..

Bundles the REED TM-8811 ultrasonic thickness gauge with a steel 5-step calibration block marked in both imperial and metric scales, letting technicia..

Same ultrasonic thickness gauge platform as the standard TM-8811, measuring 0.05-7.9 in (1.5-200mm) across ten preset material types with automatic ca..

A grab-and-go inspection bundle built for home inspectors and DIY buyers, combining an infrared thermometer, a digital psychrometer, pinless and pin-t..

The C100 is a reflectorless total station built for coordinate, angle, and traverse survey work with prism-free ranging.

The C200 is a higher-end manual total station offering longer range and greater accuracy than the C100.

The SINOPOLE is a two-metre, four-section carbon-fibre GNSS rover rod used to hold a survey antenna/receiver at a fixed height above a survey point.

The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..

The SinoGNSS E300 with the C50 camera option uses the same RTK/PPK-equipped mapping airframe as the base E300, but is fitted with ComNav's higher-spec..