REED INSTRUMENTS

A North American-standard 110V AC power adapter for REED SD-Series data loggers, stepping 120V mains power down to a regulated 9V DC supply. Fitted wi..

A 24-inch strip of reflective tape meant to be cut into small tabs and applied to a rotating shaft or component so a photo tachometer can pick up a cl..

A temperature-focused test kit bundling a compact digital multimeter with temperature input, an infrared thermometer, and a non-contact AC voltage det..

This heated semiconductor gas sensor detects gasoline, propane, natural gas or fuel oil. For use it with the REED C-383 combustible gas detector.

A windshield ball that fits over 1/2 inch microphones, reducing wind noise when the REED meter is used outdoors.

The Reed SD-2010 is a handheld heat stress meter and data logger that calculates Wet Bulb Globe Temperature (WBGT) by combining air temperature, humid..

The REED SD-230 is a data-logging pH/ORP meter measuring 0.00-14.00 pH and 0-1999 mV ORP, with 0.01 pH resolution and manual temperature compensation...

The SD-230-Kit2 bundles REED's SD-230 data-logging meter with a PE-11 pH electrode and an ORP-14 ORP electrode. It measures pH from 0.00-14.00 and ORP..

The Reed SD-4307 is a handheld meter that measures conductivity, total dissolved solids, and salinity in water, with automatic temperature compensatio..

A handheld digital force gauge that measures push and pull loads up to 44 lb (20 kg) with a reversible display for easy reading in either testing dire..

A genuine replacement load cell for the Reed SD-6020 instrument, the internal sensor that measures applied force/weight.

The REED SD-6020-NIST is a data-logging push/pull force gauge with a 20 kg (44 lb) capacity and a reversible display that stays readable no matter whi..

A higher-capacity version of REED's SD-series force gauge, recording push and pull forces up to 220 lb (100 kg) with the same reversible-display desig..

This is a genuine REED replacement load cell sensor for the SD-6100 Data Logging Force Gauge, intended to restore or replace the force-sensing element..

The REED SD-6100-NIST is the higher-capacity sibling of the SD-6020, measuring push and pull forces up to 100 kg (220 lb) with a 4-digit backlit LCD t..

A vibration meter and data logger that tracks machinery velocity and acceleration to flag abnormal vibration levels, measuring per ISO 2954 with RMS, ..

This genuine REED replacement vibration probe restores full functionality to your SD-8205 Vibration Meter/Data Logger once the original wears out or i..

The REED SD-9300 is a 7-in-1 environmental data logger that records air velocity, air temperature, ambient temperature, relative humidity, ambient lig..

The REED SD-947 is a 4-channel thermocouple thermometer with data logging, supporting Type K, J, R, S, E, and T thermocouples plus 2-channel RTD probe..

Optional RTD Temperature Probe for use with the REED SD-947 Data logging Thermometer.Features: Measurement range: -58 to 752°F (-50 to 400°C) Class A..