About SINOGNSS
Sinognss E300 Drone with Basic Camera, C20 Camera Kit
The SinoGNSS E300 is a quadcopter mapping drone built around ComNav's K8 RTK/PPK GNSS module, giving centimeter-level photo positioning without ground..
Sinognss E300 Drone with Optional Camera, C50 Kit
The SinoGNSS E300 with the C50 camera option uses the same RTK/PPK-equipped mapping airframe as the base E300, but is fitted with ComNav's higher-spec..
SinoGnss Electric Steering Wheel for AG501 Pro Autosteer System
This SinoGNSS-branded electric steering wheel is the actuator module of ComNav's autosteer kit, mounting onto the tractor's steering column to physica..
Sinognss G200 Antennae Cable
A TNC coaxial antenna cable connecting the G200 receiver to its external GNSS antenna.
Sinognss G200 Battery
The TG-72-34L is a 7.4V 3400mAh Li-ion battery pack for the G200 GNSS receiver.
Sinognss G200 Battery Charger
A wall-mount battery charger for the G200 GNSS receiver's battery pack.
Sinognss HYD10 Portable Echo Sounder
The SinoGNSS HYD10 is a portable, IP67-rated single-beam echo sounder weighing about 1.2 kg, using a 200 kHz transducer to measure depths from 0.3 to ..
Sinognss Hyd300 Sbec Single Beam Echo Sounder
A single-beam echo sounder console and transducer set up for depth measurement during hydrographic survey work.
Sinognss Hyd600m Multi Beam Echo Sounder
The SinoGNSS HYD600M is a multi-beam echo sounder used in hydrographic surveying to measure underwater depth across a wide swath in a single pass.
Sinognss Jupiter Laser Gnss Receiver Incl. Internal Uhf-gsm Modem
Package Details:-1x Comnav Jupiter Receiver Set-2x Batteries-1x Charger-1x USB/RS232 Data Cable-1x Power Cable-1x UHF Antennae
Sinognss Lidar H600 Airborne Lidar System
The SinoGNSS H600 is an airborne LiDAR system mounted on a drone or aircraft, used to capture dense, accurate 3D point-cloud data of terrain and struc..
Sinognss Ls Series Battery Charger
A dual-slot battery charger for LS-series laser scanner battery packs.
Sinognss Ls Series Laser Scanner Battery
A Li-ion battery pack for the SinoGNSS LS-series laser scanner, used to power the scanner in the field.
Sinognss LS300 Laser Scanner Backpack Mount Kit
The backpack kit turns the LS300 into a wearable mobile mapping rig for walking surveys outdoors. It's roughly 33x26x16cm, weighs about 2.21kg, uses a..
Sinognss LS300 Laser Scanner M300 Dji Drone Mount Kit
This mount kit lets the SinoGNSS LS300 3D laser scanner pair with a DJI Matrice 300 drone for aerial LiDAR mapping. It's built from aviation-grade alu..
Sinognss LS300-16-120 LS300 Whole set (16Line) 120M
A handheld 3D laser scanner from ComNav's SinoGNSS line that uses SLAM-based simultaneous localization and mapping rather than GNSS signals, so it can..