This is a 16.4ft telescoping aluminum levelling staff with imperial (feet/inch) graduation markings, extending in sections for use with an automatic/d..

The C9+CRG is a dedicated AC power adapter and charging cable set used to recharge the removable battery of the C9+ rugged handheld surveying data col..

The C9+BAT (HW-L1-65N) is a rechargeable lithium-ion battery pack for the C9+ rugged Android handheld data collector, with a multi-pin contact interfa..

The C9FANTC is a GNSS antenna coaxial cable kit with connector adapters and weatherproof heat-shrink sleeves, used to route satellite signal from an e..

The CMS is a hardcover field level book ruled for the Height of Collimation booking method, with columns for back sight, intermediate sight, fore sigh..

The DMW-01 is a walk-behind digital measuring wheel with a 12-inch wheel, backlit LCD readout and a folding/telescoping handle, storing several past r..

The GH-A300 is a one-piece forged steel geological hammer with a flat striking face on one side and a curved pick point on the other, 300g head weight..

A mounting adapter plate used to attach an external GNSS radio antenna to a pole, tripod, or vehicle surface.

This is a roughly 300mm rubber-duck whip antenna with an SMA male connector, covering the 457-467MHz UHF band for GNSS radio links.

The Instar X5 is a colour add-on camera module that clips onto compatible GoSLAM scanner bodies to add high-resolution colour imaging for true-colour ..

GoSLAM's basic vehicle mounting kit secures a scanner to a car roof or rack for mobile mapping while driving, with the GNSS antenna sold separately.

GoSLAM's handheld extension pole lets an operator hold the scanner higher or further out to reach over obstacles, into stairwells, or above crowds whi..

GoSLAM's UAV mounting kit attaches a compatible scanner underneath a drone airframe such as the DJI M350 for aerial LiDAR mapping.

The GoSLAM M40 is a lightweight handheld mobile mapping scanner using fixed-LiDAR SLAM technology, rated for a 70m scan radius and roughly 1cm accurac..

This is the M40 body fitted with an integrated RTK positioning module, adding survey-grade absolute georeferencing to the same 70m-range handheld LiDA..

GoSLAM's RTK-capable backpack carrying frame lets an operator carry a scanner hands-free for extended walking surveys, sold without the GNSS receiver ..

The T100i extends the T-series design to a 120m scanning radius while keeping roughly 1cm point accuracy, using laser-SLAM so it needs no external GNS..

The Pro variant of the T100i adds an 8K HDR panoramic colour camera and survey-grade true-colour point cloud output on top of the same 120m-range scan..

The T300i Pro is GoSLAM's long-range flagship, with 32 laser lines, a 300m scanning distance, 640,000 pts/sec speed, roughly 1cm accuracy, plus a buil..

The GoSLAM T50i is a portable mobile scanner with a rotating laser probe rated to a 50m radius at about 1cm accuracy, paired with a colour touchscreen..