Survey Accessories

The G75002 is a rotating 5/8-11 tribrach adapter with a removable centre hub that can stay attached to the GPS receiver or prism for faster setup swap..

The G75003 is a friction-rotating 5/8-11 adapter letting the prism be re-aimed after it's already seated in the tribrach.

The G92003 is a metal-housed optical square using two glass pentaprisms to sight true right angles, used for staking lines, offsets, and curve layout.

The G92004 is a self-adhesive retroreflective target sheet, 50x50mm, with a diamond-prism reflective pattern and printed crosshair for precise total-s..

The G92005 is the same self-adhesive diamond-pattern retroreflective target with printed crosshair, sized down to 40x40mm for smaller or closer-range ..

The G92006 is a self-adhesive retroreflective target sheet, 30x30mm, with a diamond-prism reflective pattern and printed crosshair for precise total-s..

The Gain Flex UHF External Antenna (also commonly referred to as the Gainflex or GAT series) is a high-performance, flexible whip antenna designed spe..

The GDF21-BK is a Leica-style tribrach without an optical plummet, using three levelling screws and a circular bubble vial to seat instruments over a ..

The GDF22-BK is the same Leica-style tribrach design fitted with a built-in optical plummet for precise centring over a survey point.

The GH-A300 is a one-piece forged steel geological hammer with a flat striking face on one side and a curved pick point on the other, 300g head weight..

The GH-A600 is a heavier 600g geological hammer with a pointed tip and flat striking face, and a shock-reduction grip.

A geologist's rock hammer with a pointed pick on one end and a flat square face on the other, fitted with a shock-absorbing grip handle. Geologists us..

The GH-B600 is a geological hammer with a pointed tip on one side and a flat/chisel-edge head on the other, 600g weight, with a shock-reduction grip, ..

The GMP111 is a compact Leica-style mini prism in a three-jaw housing, supplied with four aluminum screw-together range-pole sections and a stainless ..

The GMP111-0 is the same mini prism assembly as the GMP111, offered as the zero-offset variant used when the prism must read the true ground point wit..

The QT450A is a UHF whip antenna operating at 450-470MHz with roughly 4dBi gain and a TNC-J connector, used as the radio antenna for RTK GNSS base/rov..

The GP220TLD-2C is a 2.2m twist-lock carbon-fibre GPS rover pole with a dual metric/imperial scale.

The GP250TLD-2C is a 2.5m twist-lock carbon-fibre GPS rover pole, same family as the 2.2m version.

A black carbon-fiber GNSS rover pole with twist-lock sections, extending to 3.6m across three sections, with a dual meter/feet scale printed along the..

The same carbon-fiber twist-lock GNSS pole design extended to 4.6m over four sections, for taller RTK/GNSS rover setups, with the same dual m/ft scale..