Measuring Tools Accessories

This REED R2930 is a Type K right-angle surface thermocouple probe designed to measure temperatures on flat surfaces and inside hard-to-reach areas su..

The R2930 is a 90-degree right-angle version of REED's Type K surface probe, letting the sensor tip contact a flat surface or duct wall while the hand..

Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts.Features: Measurement range: -58 to 1652°F (-50 to..

The R2940 is a Type K air/gas probe with a perforated stainless-steel shield around the sensing tip, designed to measure moving air and gas streams su..

This Type K immersion thermocouple probe measures temperatures from -50C to 600C (-58F to 1112F) with a response time under 2 seconds. It has a roughl..

The R2950 is a Type K immersion/general-purpose probe intended for dipping into liquids such as water, oils and non-corrosive fluids, with a straight ..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

The R2960 is a Type K needle-tip probe with a slim hypodermic-style tip meant to pierce into food, rubber, gels and other soft solids for an internal ..

The R2970 is a bright yellow, spring-loaded pipe-clamp thermocouple probe designed to snap securely onto pipes and tubing up to about 1.4 in in diamet..

A spring-loaded Type K thermocouple probe built to clamp directly onto pipes up to about 1.4 in (35 mm) across, so technicians can log surface tempera..

The R2980 is a Type K air-temperature probe purpose-built for monitoring ovens, refrigerators, and freezers, with a stainless-steel shielded tip that ..

An air-temperature Type K probe purpose-built for ovens, walk-in coolers, and freezers, with a stainless-steel shield around the sensing tip so it rea..

The R2990 is a simple black K-Type adapter that converts a standard mini-connector thermocouple probe into dual shrouded banana-plug inputs, letting i..

The R3000SD-ATC is an Automatic Temperature Compensation probe designed to pair with REED's R3000SD and SD-230 data logging pH/ORP meters, improving r..

The REED R3000SD-ORP is a professional replacement ORP (oxidation-reduction potential) electrode built for the REED R3000SD and SD-230 data logging me..

A general-purpose pH electrode built for REED's R3000SD and SD-230 data logging pH/ORP meters. It uses a single Ag/AgCl junction housed in a PVC body ..

Replacement sensor probe for REED's R3100SD and SD-4307 data logging conductivity meters, sized at about 22mm diameter by 128.5mm length. It picks up ..

This pH electrode measures 0 to 14 pH and is compatible with the REED R3500 pH Meter.

Genuine 110V AC/DC power adapter made for the REED R3525 pH/mV meter, letting it run continuously from a wall outlet instead of its internal 9V batter..

A combination pH electrode with a built-in temperature sensor, made as a direct replacement for the REED R3525 pH/mV meter. It terminates in a 1-meter..