The same red-and-white twist-lock aluminum prism pole design, extended to 3.60m across its sections, with a dual adapter head for mounting different p..

The same red-and-white twist-lock prism pole family extended to 4.60m, giving longer reach for elevated or obstructed survey points, dual-adapter, sof..

The longest pole in this twist-lock family, reaching 5.20m across additional sections, still in the same red-and-white finish with dual adapter head a..

The DZJ-200A is a laser plummet instrument that projects a fine reference dot both up and down for precise vertical alignment, used in high-rise const..

The ETT30A-160YL is a yellow elevator aluminium tripod with a geared centre column for fine height adjustment, used to support laser levels and simila..

The ETT30A-230YL is a taller version of the yellow elevator aluminium tripod, with a geared centre column for fine height adjustment.

The FDC01-BK is the same three-jaw carrier/adapter design as the FDC01D-BK, without the plummet eyepiece.

The FDC01D-BK is a black three-jaw Topcon-style carrier/adapter with an integrated optical plummet eyepiece that clips into a tribrach to hold a prism..

A rotating Leica-style adapter with a built-in optical plummet for centering over a survey point, stainless-steel 5/8"-11 thread base, and a small tub..

The FDJ01-BK is the same style of black three-screw levelling tribrach as the FDJ01D-BK, but without the plummet sight, a simpler lower-cost base.

The FDJ01D-BK is a black anodized three-screw Topcon-style tribrach with a built-in centering-plummet sight and calibrated circular vial, letting a su..

The FG01N is a small stainless-steel prism/GPS pole adapter with a 5/8-11 male thread and a rubberized base collar, used to connect a GNSS antenna or ..

The FG01S is a removable rotating adapter with a 5/8-11 brass thread, used for mounting a GPS receiver, prism, or target onto a tribrach or tripod.

The FG01TP is a rotating tribrach adapter with a 5/8-11 thread and brass locking knob, letting a prism or GPS pole rotate freely once mounted on a tri..

The DRT8314A is a non-adhesive PVC flagging tape in bright orange with black polka-dot markings, used to flag survey stakes, boundary points, and grad..

The DRT8314 is a non-adhesive yellow/black striped marking ribbon, roughly 5cm wide, used to flag survey stakes, hazards and site boundaries.

The G21013 is an aluminum contractor-grade tripod with a flat/triangle head and a quick-clamp dual-lock mechanism on telescoping square-tube legs, ext..

The G21018 is a heavy-duty fiberglass tripod with a large round instrument head and a dual-clamp lock, aimed at robotic total station and theodolite w..