The G73003 is the same rotatable optical-plummet carrier concept as the G73002 but with a Swiss-style stub fitting instead of a thread.

The G73005 is a simple stub-fit carrier for tribrachs that already have an optical plummet, with a Swiss-style locking pin, used as a traverse or GPS ..

The Muya G73006 is Simple carrier for use in tribrachs with optical plummet. Suitable for direct fitting of GNSS antennas or 5/8 screw fitting Circula..

The Muya G73007 Optical Plummet Twist Focus Tribrach is a high-quality tribrach featuring: An optical plummet and 2X magnification and a twist focusIt..

Suitable for TPS instruments with an angular accuracy of greater than 2". The footscrews have a large diameter which permits fine adjustment even when..

The G73009 is a laser-plummet tribrach with a focused laser dot for centring, a circular vial, and standard three-prong forced centering.

The G75001 is a black friction-top rotating adapter that mounts a 5/8-11 prism or GNSS receiver onto any Wild-type tribrach with plummet.

The G75002 is a rotating 5/8-11 tribrach adapter with a removable centre hub that can stay attached to the GPS receiver or prism for faster setup swap..

The G75003 is a friction-rotating 5/8-11 adapter letting the prism be re-aimed after it's already seated in the tribrach.

The G92003 is a metal-housed optical square using two glass pentaprisms to sight true right angles, used for staking lines, offsets, and curve layout.

The G92004 is a self-adhesive retroreflective target sheet, 50x50mm, with a diamond-prism reflective pattern and printed crosshair for precise total-s..

The G92005 is the same self-adhesive diamond-pattern retroreflective target with printed crosshair, sized down to 40x40mm for smaller or closer-range ..

The G92006 is a self-adhesive retroreflective target sheet, 30x30mm, with a diamond-prism reflective pattern and printed crosshair for precise total-s..

The GDF21-BK is a Leica-style tribrach without an optical plummet, using three levelling screws and a circular bubble vial to seat instruments over a ..

The GDF22-BK is the same Leica-style tribrach design fitted with a built-in optical plummet for precise centring over a survey point.

The GH-A600 is a heavier 600g geological hammer with a pointed tip and flat striking face, and a shock-reduction grip.

The GH-B600 is a geological hammer with a pointed tip on one side and a flat/chisel-edge head on the other, 600g weight, with a shock-reduction grip, ..

The GMP111 is a compact Leica-style mini prism in a three-jaw housing, supplied with four aluminum screw-together range-pole sections and a stainless ..

The GMP111-0 is the same mini prism assembly as the GMP111, offered as the zero-offset variant used when the prism must read the true ground point wit..

The GP220TLD-2C is a 2.2m twist-lock carbon-fibre GPS rover pole with a dual metric/imperial scale.