Survey Equipment

The SinoGNSS E300 with the C50 camera option uses the same RTK/PPK-equipped mapping airframe as the base E300, but is fitted with ComNav's higher-spec..

The SinoGNSS HYD10 is a portable, IP67-rated single-beam echo sounder weighing about 1.2 kg, using a 200 kHz transducer to measure depths from 0.3 to ..

A single-beam echo sounder console and transducer set up for depth measurement during hydrographic survey work.

The SinoGNSS HYD600M is a multi-beam echo sounder used in hydrographic surveying to measure underwater depth across a wide swath in a single pass.

Package Details:-1x Comnav Jupiter Receiver Set-2x Batteries-1x Charger-1x USB/RS232 Data Cable-1x Power Cable-1x UHF Antennae

LiDAR360 MLS (Mobile/Handheld Laser Scanning) is a point-cloud processing package used to post-process data captured by mobile and backpack scanners s..

The SinoGNSS H600 is an airborne LiDAR system mounted on a drone or aircraft, used to capture dense, accurate 3D point-cloud data of terrain and struc..

A dual-slot battery charger for LS-series laser scanner battery packs.

A Li-ion handle battery pack for the LS-series laser scanner.

A Li-ion battery pack for the LS-series laser scanner.

A handheld 3D laser scanner from ComNav's SinoGNSS line that uses SLAM-based simultaneous localization and mapping rather than GNSS signals, so it can..

The backpack kit turns the LS300 into a wearable mobile mapping rig for walking surveys outdoors. It's roughly 33x26x16cm, weighs about 2.21kg, uses a..

This roof/vehicle mount kit attaches the LS300 laser scanner to a car for fast mobile scanning of roadside infrastructure and corridors. It measures r..

This mount kit lets the SinoGNSS LS300 3D laser scanner pair with a DJI Matrice 300 drone for aerial LiDAR mapping. It's built from aviation-grade alu..

A backpack mount kit for the ComNav/SinoGNSS LS600 laser scanner, enabling hands-free, mobile mapping across urban, mining, and forestry environments...

This is the full-kit configuration of the SinoGNSS LS600 handheld 3D laser scanner, bundled as a 32-line unit with a 120-metre working range for corri..

A range pole used to extend the reach and height of the LS600 laser scanner during a scan.

The SinoGNSS LS600-16-120 is a handheld 3D mobile laser scanner from ComNav Technology, combining a 16-channel LiDAR (0.5-120m range, up to 320,000 po..

The SinoGNSS LS600-32-300 is the high-end configuration of ComNav's handheld 3D laser scanner, built for surveying in GNSS-challenged environments lik..