Search

The REED PE-11 is a general-purpose pH electrode built with a PVC body and a single Ag/AgCl junction, measuring 10mm in diameter by 130mm in length. I..

A double-insulated test lead set pairing one black and one red 48-inch flexible lead, each tipped with stainless-steel probes and shrouded 4mm banana ..

The REED R1000-KIT bundles a pair of safety-rated test leads with shrouded banana plugs and a pair of alligator clips with insulated covers, letting t..

The REED R1004 is a box of 20 individual pH 4 calibration buffer pouches for preparing fresh calibration solution on site. Each powder pouch is dissol..

The Reed R1007 is a pH 7.00 calibration buffer supplied as 20 individual powder pouches for on-site electrode calibration. Each pouch is dissolved in ..

A pair of general-purpose test probes (one red, one black) with banana-style spring contacts, designed for plugging into other banana-jack receptacles..

A test probe set (one red, one black) with sharp stainless-steel tips built to pierce wire insulation for a fast, secure contact point. Rated CAT II/I..

An industrial-grade safety probe set (one red, one black) with sharp stainless-steel tips and an ergonomic grip, rated for 1000V/10A with CAT III 1000..

A test probe pair (one red, one black) with banana-style spring contacts rather than sharp piercing tips, meant for connecting into banana-jack test p..

A pair of sharp-tipped test probes (one black, one red) built for precise contact on electronic components and circuit boards. Each probe measures 4.5..

The Reed R2100 is a handheld thermal imaging camera with a 160x120 (19,200-pixel) infrared sensor, measuring temperatures from -20C to 400C with sensi..

This product is a spare 7.4V lithium polyer battery, intended for use with the REED R2100 Thermal Imager.

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) ..

This Type K immersion thermocouple probe measures temperatures from -50C to 600C (-58F to 1112F) with a response time under 2 seconds. It has a roughl..

The R2950 is a Type K immersion/general-purpose probe intended for dipping into liquids such as water, oils and non-corrosive fluids, with a straight ..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) ..

The R2960 is a Type K needle-tip probe with a slim hypodermic-style tip meant to pierce into food, rubber, gels and other soft solids for an internal ..

The R2980 is a Type K air-temperature probe purpose-built for monitoring ovens, refrigerators, and freezers, with a stainless-steel shielded tip that ..

An air-temperature Type K probe purpose-built for ovens, walk-in coolers, and freezers, with a stainless-steel shield around the sensing tip so it rea..

The REED R3100 is a higher-range digital manometer measuring gauge and differential pressure up to 100 psi (150 psi max), with 0.1 psi resolution and ..