Search

The REED R7110 is a dual-mode tachometer that measures rotational speed by either laser (non-contact) or direct contact, reading up to 99,999 RPM non-..

The REED R7110-NIST is the same dual-mode contact/laser tachometer, reading up to 99,999 RPM by laser or 19,999 RPM by direct contact, with a backlit ..

The Reed R7920 is a compact ultrasonic thickness gauge covering 0.04-11.8 in (1-300mm) with a 2.4 in backlit monochrome display and a rechargeable lit..

The R7920-NIST is the Reed R7920 ultrasonic thickness gauge supplied with a NIST-traceable calibration certificate, plus the standard bundle of coupla..

The REED R8010 laser distance meter extends measuring range up to 328 ft (100m) with a bright multi-line LCD showing distance, area, and volume calcul..

The R8010 extends REED's laser distance meter line to a 328 ft (100 m) range with IP54 dust/splash resistance for tougher job-site conditions. It shar..

A dedicated data-logging light meter reading from roughly 2,000 up to 100,000 lux (200-10,000 foot-candles) through a detachable, protective-covered s..

The REED R8100SD-KIT is a data-logging light meter that measures ambient light up to 100,000 lux (10,000 foot-candles) with a clear backlit LCD displa..

The REED R8100SD is an SD-card data-logging light meter reading up to 100,000 lux (10,000 fc) through a detachable photodiode sensor with CIE-matched ..

A genuine replacement light sensor with its own protective cover, built as the detachable probe for REED's R8100SD and SD-1128 data-logging light mete..

The R9100 is a handheld ultrasonic leak detector that converts the inaudible high-frequency sound produced by escaping gas, air, vacuum, or fluid at a..

The REED R9999 is a rugged, steel-reinforced industrial tool bag built to carry hand tools, test instruments, and small equipment on the job site. It ..

The REED RINSPECT-KIT bundles the essential tools a home inspector needs in one case: an infrared thermometer, a dual moisture meter, a non-contact vo..

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

A North American-standard 110V AC power adapter for REED SD-Series data loggers, stepping 120V mains power down to a regulated 9V DC supply. Fitted wi..

A 24-inch strip of reflective tape meant to be cut into small tabs and applied to a rotating shaft or component so a photo tachometer can pick up a cl..

This heated semiconductor gas sensor detects gasoline, propane, natural gas or fuel oil. For use it with the REED C-383 combustible gas detector.

The REED SD-1128 is a handheld light meter with an integrated SD card data logger, capable of measuring ambient illumination up to 100,000 lux (10,000..

A higher-capacity version of REED's SD-series force gauge, recording push and pull forces up to 220 lb (100 kg) with the same reversible-display desig..