Search

The Muya G61101 is a plain Quick Release Pole Bracket Made of anodized aluminum with great stability.Perfect for GNSS surveys requiring a pole and a d..

The G61102 is a quick-release clamp bracket for mounting a data collector to a survey pole, with an integrated compass on the housing for quick orient..

The TC-10 is an adjustable claw-cradle holder, sized for the Geo 6000 handheld (95-110mm width, 47mm height).

The TC-7 is an adjustable claw-cradle holder, sized for CEO/CE/XT/XM/TSCE handhelds (75-95mm width, 47mm height).

This coating thickness gauge non-destructively measures paint, plating, and other coating layers from 0 up to 1500 microns (59 mil) on both ferrous an..

A handheld digital differential-pressure gauge (manometer) for reading small pressure changes, useful for checking air-filter condition, duct pressure..

This handheld digital stroboscope uses a flashing xenon lamp to visually freeze the motion of rotating or reciprocating machinery, letting technicians..

The REED K4020-NIST is a digital xenon stroboscope for non-contact speed measurement of rotating equipment such as fans, motors, pumps and centrifuges..

A pair of general-purpose test probes (one red, one black) with banana-style spring contacts, designed for plugging into other banana-jack receptacles..

A test probe set (one red, one black) with sharp stainless-steel tips built to pierce wire insulation for a fast, secure contact point. Rated CAT II/I..

Pen-style non-contact AC voltage detector with a built-in flashlight, sized for a shirt pocket with its integrated clip. It has two sensitivity settin..

Same pen-style non-contact AC voltage detector as the single R5110, sold as a 10-unit bulk pack for electrical contractors, training programs, or team..

The REED R7110 is a dual-mode tachometer that measures rotational speed by either laser (non-contact) or direct contact, reading up to 99,999 RPM non-..

The REED R7110-NIST is the same dual-mode contact/laser tachometer, reading up to 99,999 RPM by laser or 19,999 RPM by direct contact, with a backlit ..

The REED RINSPECT-KIT bundles the essential tools a home inspector needs in one case: an infrared thermometer, a dual moisture meter, a non-contact vo..

The REED RINSPECT-KIT2 is the deluxe step up from the base inspector kit, adding a circuit breaker finder, a combustible gas leak detector, and a lase..

The REED RINSPECT-KIT3 is the professional-grade inspector bundle, combining the infrared thermometer, receptacle/GFCI tester, dual moisture meter, no..

A North American-standard 110V AC power adapter for REED SD-Series data loggers, stepping 120V mains power down to a regulated 9V DC supply. Fitted wi..