Search

The 2016C-10M is the same carbon-steel gauging tape and brass plumb-bob design, wound to a compact 10m length for small tanks and quick spot checks.

The 2016C-15M is the same carbon-steel gauging tape design at its shortest 15m length, for compact tanks or quick spot checks.

The 2016C-20M is the same reel-and-plumb-bob oil gauging tape design at 20m length, for smaller tanks or shallower dip points.

The 2016C-30M is the same carbon-steel oil gauging tape and brass plumb-bob design, wound to a 30m length for mid-size tank dipping.

The 2016C-50M is a carbon-steel oil gauging tape reel with a folding crank handle and a brass sounding weight on the tape end, used to dip and measure..

The same clamp-on bubble-and-base design, sized to grip 30mm-diameter prism poles for quick verticality checks in the field.

The G92006 is a self-adhesive retroreflective target sheet, 30x30mm, with a diamond-prism reflective pattern and printed crosshair for precise total-s..

A compact green cross-line laser level with a rugged grey/yellow housing, magnetic base with rotating knobs, and a rechargeable Li-ion pack, designed ..

This is the complete KLS-515G line laser kit: 4V1H, green beam, 30mW, supplied with a Li-ion battery pack, charger, and hard case.

The KLS-515G is a 4-vertical/1-horizontal line laser with a 30mW green beam, projecting multiple reference lines for layout, levelling, and alignment ..

The KRL-405PR is a rotary laser level with a 30mW red beam, horizontal plane only, used for levelling and grading over large areas on site.

The KRL-420G is a rotary laser level with a 30mW green beam, offering both horizontal and vertical planes for greater visibility in bright outdoor con..

A self-levelling horizontal/vertical rotary laser with a rugged handled housing, backlit control keypad, and rotating beam head, built for red-beam la..

This is the complete KRL-540R rotary laser kit: red beam, 30mW, horizontal and vertical planes, supplied with an RC200 remote control (working distanc..

The KRL-540R is a rotary laser level with a 30mW red beam, offering both horizontal and vertical planes for general construction and site levelling wo..

A steel oil-dipping/gauging tape wound on a compact reel with a crank handle and a brass plumb-bob weight attached to the tape end. It is used to meas..

The N2020-30M is a 30m open-reel engineering tape with a nylon-coated steel blade for tear and moisture resistance, with a wind-up crank handle for re..

The TC-6 is an adjustable claw-cradle holder, sized for Recon/Archer/Geta 535 handhelds (72-92mm width, 30mm height).

The TokNav TCA930M is a compact 3D choke-ring antenna used at a GNSS reference/CORS station to suppress multipath interference and deliver highly stab..