Search

The FOIF B2650 is a Sectional Aluminum leveling staff with a Length of 5m, in five sections. Dual measuring faces with bar code and mm graduations..

A UHF radio antenna built for the FOIF QT450A external radio modem, used to transmit or receive RTK correction signals between a GNSS base station and..

This is a flexible whip-style UHF antenna tuned to the 450-470MHz band commonly used for RTK radio datalinks, with roughly 4dBi of gain and a threaded..

GoSLAM's UAV mounting kit attaches a compatible scanner underneath a drone airframe such as the DJI M350 for aerial LiDAR mapping.

The GoSLAM T50i is a portable mobile scanner with a rotating laser probe rated to a 50m radius at about 1cm accuracy, paired with a colour touchscreen..

The 2016C-10M is the same carbon-steel gauging tape and brass plumb-bob design, wound to a compact 10m length for small tanks and quick spot checks.

The 2016C-15M is the same carbon-steel gauging tape design at its shortest 15m length, for compact tanks or quick spot checks.

The 2016C-20M is the same reel-and-plumb-bob oil gauging tape design at 20m length, for smaller tanks or shallower dip points.

The 2016C-30M is the same carbon-steel oil gauging tape and brass plumb-bob design, wound to a 30m length for mid-size tank dipping.

The 2016C-50M is a carbon-steel oil gauging tape reel with a folding crank handle and a brass sounding weight on the tape end, used to dip and measure..

A 32mm clamp-on bubble base sized to match GP220TL/GP250TL telescopic GNSS rover poles, letting the surveyor confirm the rod is plumb before logging a..

The BGG22 is the same red/white banded aluminum range pole design as the BGG33, built from two roughly 1m sections for a 2m overall length with a poin..

The BGG33 is a sectional aluminum range pole in alternating red/white 50cm bands, made of three roughly 1m sections that join to a full 3m length with..

A 50-metre open-reel fiberglass measuring tape with a cross-frame body, cushioned grip, and metal winding handle. Its non-stretch fiberglass blade is ..

This is a G33100 aluminum pole extension, 25mm outer diameter, 50cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

The G33501 is a pole point tip, the hardened steel ground-contact point fitted to the base of a survey pole or rover rod.

The G33502 is a 25mm pole point with a removable tip, allowing the ground-contact point to be replaced when worn without discarding the whole pole sec..

A precision aluminium bubble vial assembly (32mm outer diameter) used as a replacement part in a survey instrument's circular level.

The G33506 is an aluminum vial assembly, 38mm outer diameter, a clip-on circular level bubble unit used to check a survey pole is held vertical during..

The G33509 is a 32mm pole point with a removable tip, sized for the larger-diameter pole range, allowing the ground-contact point to be replaced when ..