Search

The AKZ30 is a tilting triple-prism assembly: three 62mm copper-coated prisms in canisters on a polycarbonate mount, aluminum holder with 5/8-11 threa..

The G31001-FOB is the same 64mm silver-coated circular prism assembly as the YLB variant, differing only by canister colour and order code, with an an..

The G31001-YLB is a 64mm silver-coated circular prism in a tilting anodized-aluminum holder with 0/-30mm offset, fitting any 5/8-11 pole, with a rear-..

The G35001 is a two-leg aluminum support stand for prism poles, GPS/GNSS rover rods, and total-station rods, using a thumb-release clamp on telescopin..

The G35001-A is the aluminum thumb-release bipod platform, sized to clamp thinner invar/precision leveling staffs rather than standard prism poles.

The G35001-B is a purpose-built variant of the aluminum thumb-release bipod for optical leveling staffs, with a narrower clamp range to steady the rod..

The Muya G35001-P Bipod Leg Clip easily attaches to the base of any 32mm O.D. prism or antenna poleThe bipod legs snap into the clip making the system..

The G35002 is a three-leg version of the aluminum thumb-release stand family, built for stabilizing prism poles or GNSS rods in the field, extending t..

The Muya G35003 Aligator tripod features a ball-and-socket head, which makes leveling a bubble easyThe rubberized jaws hold a pole (up to 50.8mm OD) f..

The G35004 is a carbon-fiber two-leg thumb-release bipod, built to clamp poles from 15-45mm diameter without needing to thread the pole through the he..

The G35005 is a three-leg carbon-fiber stand sharing the same thumb-release mechanism and extension range as the aluminum tripod, offering lighter fie..

The G75001 is a black friction-top rotating adapter that mounts a 5/8-11 prism or GNSS receiver onto any Wild-type tribrach with plummet.

The G75002 is a rotating 5/8-11 tribrach adapter with a removable centre hub that can stay attached to the GPS receiver or prism for faster setup swap..

The G75003 is a friction-rotating 5/8-11 adapter letting the prism be re-aimed after it's already seated in the tribrach.

This is the complete KRL-540R rotary laser kit: red beam, 30mW, horizontal and vertical planes, supplied with an RC200 remote control (working distanc..

The TC-8-19 is an adjustable claw-type cradle bracket that grips a handheld data collector and locks onto a survey pole, sized for the Unistrong P9.

This pocket-sized REED digital psychrometer reads relative humidity and air temperature together, then works out wet-bulb and dew-point figures automa..

Rotating-vane thermo-anemometer that simultaneously displays air velocity and air temperature on a dual LCD, with a low-friction 2.8 in vane rated for..

A blackbody-style calibration source for verifying non-contact infrared thermometers and thermal imaging cameras, covering 122 to 932F (50 to 500C). I..

The Reed BX-500-NIST is a portable blackbody-style calibrator for checking non-contact infrared thermometers and thermal imagers across a range of 122..