Search

The AKZ30 is a tilting triple-prism assembly: three 62mm copper-coated prisms in canisters on a polycarbonate mount, aluminum holder with 5/8-11 threa..

The BGG22 is the same red/white banded aluminum range pole design as the BGG33, built from two roughly 1m sections for a 2m overall length with a poin..

The BGG33 is a sectional aluminum range pole in alternating red/white 50cm bands, made of three roughly 1m sections that join to a full 3m length with..

The DRT8314A is a non-adhesive PVC flagging tape in bright orange with black polka-dot markings, used to flag survey stakes, boundary points, and grad..

The DRT8314 is a non-adhesive yellow/black striped marking ribbon, roughly 5cm wide, used to flag survey stakes, hazards and site boundaries.

The G31001-FOB is the same 64mm silver-coated circular prism assembly as the YLB variant, differing only by canister colour and order code, with an an..

The G31001-YLB is a 64mm silver-coated circular prism in a tilting anodized-aluminum holder with 0/-30mm offset, fitting any 5/8-11 pole, with a rear-..

The G33011 is a compact 39cm aluminum mini prism pole with a fixed 5/8-11 tip and an adjustable vial for quick levelling, unmarked shaft, ships with a..

The G33012 is a 155cm aluminum mini prism pole with an aluminum locking collar, adjustable brass 5/8-11 tip, and dual metric graduations.

The G33015 is a very short 12cm aluminum stakeout pole for handheld mini-prism work, fixed 5/8-11 tip and a levelling vial.

This is a G33100 aluminum pole extension, 25mm outer diameter, 25cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 50cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 100cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

This is a G33100 aluminum pole extension, 25mm outer diameter, 180cm length, used to lengthen a GNSS rover rod or prism pole for taller setups.

The Muya G71003 Leveling Staff features a 4m length with E/0.5CM, Zero At The Bottom graduations.Constructed of durable alloy with anodized sections a..

The Muya G71003 Leveling Staff features a 5m length with E/0.5CM, Zero At The Bottom graduations.Constructed of durable alloy with anodized sections a..

The Muya G71003 Leveling Staff features a 7m length with E/0.5CM, Zero At The Bottom graduations.Constructed of durable alloy with anodized sections a..

The G71007 is a lightweight cut and fill rod with a level vial and cm/mm graduations, used in grading and earthworks to read cut/fill depth directly a..

The TC-8-19 is an adjustable claw-type cradle bracket that grips a handheld data collector and locks onto a survey pole, sized for the Unistrong P9.