Search

The Z34B-RY is the same tilting triple-prism canister design, in a red shell with a yellow chevron target.

The Z34B-YY is a tilting triple-prism canister (three glass elements) on a bracket with a large chevron target, yellow shell and yellow target for lon..

The P78PANTC is a coaxial extension cable with threaded connectors used to link the P78 GNSS receiver to an external or vehicle-mounted antenna for im..

The PLB is a brass, cone-shaped plumb bob with a removable steel tip and a cord attachment cap, used to establish a precise vertical line over a groun..

A genuine 9mm replacement camera head with a 3-foot gooseneck cable, built to swap onto your REED BS-150 video borescope when the original probe wears..

Provides 6 ft extension for the R8100 and BS-150 Video Borescope Cameras.

A blackbody-style calibration source for verifying non-contact infrared thermometers and thermal imaging cameras, covering 122 to 932F (50 to 500C). I..

The Reed BX-500-NIST is a portable blackbody-style calibrator for checking non-contact infrared thermometers and thermal imagers across a range of 122..

The REED C-383 is a handheld combustible gas leak detector with a 15-inch flexible gooseneck probe for reaching tight spaces. It uses a heated semicon..

A one-handed combustible gas sniffer that senses a broad range of flammable vapors and gases, from natural gas, propane and butane to gasoline, solven..

Replacement ferrous probe for the REED CM-8822 coating thickness gauge, used for measuring non-magnetic coatings such as paint or plating on magnetic ..

Replacement non-ferrous probe for the REED CM-8822 coating thickness gauge, designed for checking non-magnetic coating thickness -- varnish, paint, an..

This REED test probe set features banana-style spring-contact probes with a 0.8 inch (19mm) tip and 4.1 inch (105mm) overall length, rated CAT III 100..

Heavy-duty industrial test probes with stainless-steel sharp-point tips designed to safely pierce wire insulation for accurate readings. Featuring an ..

Compact electronic test probes with fine, sharp tips built for precise probing of small components and circuit boards. Rated CAT II 1000V, they're sui..

This handheld digital stroboscope uses a flashing xenon lamp to visually freeze the motion of rotating or reciprocating machinery, letting technicians..

This is a genuine REED replacement xenon flash bulb designed for the K4020 and K4020-230V digital stroboscopes (also compatible with the K4030 series)..

The REED K4020-NIST is a digital xenon stroboscope for non-contact speed measurement of rotating equipment such as fans, motors, pumps and centrifuges..

This type k male connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-181 is rated up 425°F (250°C) and i..

This type k female connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-182 is rated up 425°F (250°C) and..