Search

The Reed R1675 is a Bluetooth-enabled pinless (non-invasive) moisture detector used to scan wood and building materials for moisture content without p..

This is the same REED R2165 thermal camera (160x120 resolution, 2.8 in color display, -10 to 400C range) but shipped with a NIST-traceable calibration..

A genuine spare 3.7V/5200mAh rechargeable lithium-ion battery pack made specifically for the REED R2170 thermal imaging camera, useful for extending f..

This kit pairs the REED R2400 Type K single-input thermocouple thermometer with three interchangeable probes, a surface probe, an air/gas probe, and a..

The R2450SD-Kit3 pairs the 4-channel data logging thermometer with four Type K beaded-wire probes, an SD card, and an AC power adapter, letting users ..

The R2450SD-Kit4 combines the data logging thermometer with four different Type K probe styles (surface, air/gas, immersion, and needle-tip) to handle..

This kit outfits the R2450SD data logger with two RTD temperature probes instead of thermocouples, giving more stable, higher-precision readings for a..

The R2450SD-Kit6 pairs the data logging thermometer with two Type K air probes purpose-built for ovens, refrigerators, and freezers, each shielded wit..

The R2450SD-RTD is a slim stainless-steel RTD sensor probe built as a companion accessory for REED's R2450SD and SD-947 data logging thermometers, con..

Medium gauge hypodermic needle tip, used to pierce and measure food, rubbers and solids.Features: Measurement range: -58 to 1112°F (-50 to 600°C) Des..

A handheld thermocouple calibrator that sources and measures 8 thermocouple types (R, S, B, E, K, J, T, N) plus DC volts, used to check and calibrate ..

The REED R2810-NIST is a handheld thermocouple calibrator that can both source and measure eight thermocouple types (R, S, B, E, K, J, T, N) plus mill..

This calibrator sources and reads 11 thermocouple types (A, B, C, D, E, J, K, N, R, S, T) and 5 RTD types (Pt100, Pt200, Pt500, Pt1000, Cu50), plus DC..

This is the NIST-certified version of REED's R2815 calibrator, sourcing and measuring 11 thermocouple types and 5 RTD types along with DC voltage and ..

The REED R2900 is a benchtop dry block calibrator spanning 91 to 572F (33 to 300C), built for verifying RTDs, thermocouples, and bimetal thermometers...

This is the NIST-certified version of REED's R2900 dry block calibrator, covering the same 91 to 572F (33 to 300C) range for calibrating RTDs, thermoc..

This surface thermocouple probe is designed for flat or convex surface temperature measurements. Exposed ribbon allows for direct contact with surface..

The R2920 is a Type K surface probe with an exposed ribbon contact tip built for fast, direct-contact readings on flat or gently curved surfaces, cove..

This REED R2930 is a Type K right-angle surface thermocouple probe designed to measure temperatures on flat surfaces and inside hard-to-reach areas su..

The R2930 is a 90-degree right-angle version of REED's Type K surface probe, letting the sensor tip contact a flat surface or duct wall while the hand..