Search

This REED R3525-Kit pairs a compact, cable-electrode pH/mV meter with pH 4.01 and 7.00 buffer solutions for calibration right out of the box. It reads..

The REED R3525-Kit2 builds on the standard kit by adding an AC power adapter, so the meter can run continuously without draining its battery during lo..

This is the same REED R3525 pH/mV meter body, but packaged as the KIT3 bundle for users who also need ORP and conductivity readiness out of the box. I..

Genuine REED replacement rotating vane probe for the R4000SD and SD-4207 data-logging vane thermo-anemometers. Features a 2.8 in (72mm) sensor head th..

Replacement rotating-vane sensor probe built specifically for the REED R4100 air-volume anemometer, letting users restore full velocity and airflow me..

A telescoping replacement hot-wire probe built for REED's R4500SD and SD-4214 data logging thermo-anemometers. It extends to a 280mm minimum length wi..

Genuine REED replacement multi-function sensor probe designed for the R4700SD and SD-9300 environmental data loggers. It restores the meter's ability ..

A genuine REED replacement black alligator clip sized for the R5002 high-voltage insulation tester, with toothed jaws (about 1 in/26mm opening) that b..

Genuine REED replacement red high-voltage test probe made for the R5002 insulation resistance tester. It is the standard rigid probe accessory used to..

Genuine REED replacement black test lead for the R5002 high-voltage insulation tester, supplied as a single lead. It restores the tester's black (grou..

A two-piece transmitter/receiver system for tracing live and de-energized wires, cables, and metallic conductors hidden in walls, floors, ceilings, or..

A handheld tester that measures cable length (up to roughly 100,000 feet / 30km) and low resistance by sending a pulse down the conductor and calculat..

The same pulse-reflection cable length and resistance tester as the standard R5340 -- up to about 100,000 feet of range, 20 preset plus 8 user-defined..

Capacitance decade box for circuit design and prototyping, letting users dial in a target capacitance from 100pF up to 11.111uF across 5 decade ranges..

The R5408 is a resistance decade box used for prototyping and testing circuits, offering 7 switch-selectable decade ranges spanning roughly 1 ohm up t..

This is the same REED R5408 resistance decade box -- 7 switch-selectable decade ranges from 1 ohm to roughly 11.1 megohms in 1-ohm steps, with slide s..

The REED R5500 is a 3-in-1 electrical tool that combines a circuit breaker finder, a receptacle wiring tester, and a GFCI tester in one kit. Plug the ..

The REED R5500-KIT bundles four tools for diagnosing household and light-commercial wiring: an R5500 circuit-breaker finder, an R5300 continuity teste..

The Reed R5820 is a handheld loop calibrator built for sourcing and measuring 4-20mA signals when servicing two-wire transmitters and loop-powered iso..

This is the NIST-traceable version of Reed's R5820 loop calibrator, delivered with a certificate of calibration for documented accuracy in regulated o..