Search
Muya Cls22a-gn Aluminum Bipod for Pole, Green
The CLS22A-GN is an aluminum thumb-release bipod in fluorescent green, for steadying a prism/GNSS pole.
Muya Cls22c1 Bipod for Leveling Staff, Carbon Fiber, Width 40-60mm, with Soft Bag, Single Packing.
A two-leg carbon-fiber bipod with a thumb-release clamp head that grips a prism/GPS pole and telescoping spring-loaded legs with pointed feet, used to..
Muya Cls33a-gn Aluminum Tripod, Green
The CLS33A-GN is an aluminum tripod with thumb-release legs for prism-pole support.
Muya G61204 Quick Release Cradles for Archer, Leica Dx10, Carlson Mini, Javad Victor
The G61204 is a claw-mechanism pole clamp that grips the data collector firmly to prevent slipping during rough handheld field use.
Muya Kls-515g (kll-015g) Line Laser, 4v1h,green Beam, 30mw, with One Li-ion Battery Pack, Charger, Hard Case.
This is the complete KLS-515G line laser kit: 4V1H, green beam, 30mW, supplied with a Li-ion battery pack, charger, and hard case.
Muya Kls-515g Line Laser, 4v1h,green Beam, 30mw
The KLS-515G is a 4-vertical/1-horizontal line laser with a 30mW green beam, projecting multiple reference lines for layout, levelling, and alignment ..
Reed Ls-181 Connector, Type K, Sub Miniature, Male
This type k male connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-181 is rated up 425°F (250°C) and i..
Reed Ls-182 Connector, Type K, Sub Miniature, Female
This type k female connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-182 is rated up 425°F (250°C) and..
Reed R7800 Thickness Gauge, Coating, 1250um/50mils
The REED R7800 is a non-destructive coating thickness gauge that automatically senses ferrous and non-ferrous substrates and measures up to 1250 micro..
Reed R7800-nist Thickness Gauge, Coating, 1250um/50mils W/nist Cert
Identical hardware to the standard REED R7800 coating thickness gauge (0-1250 micron / 50-mil range, auto ferrous/non-ferrous detection, color LCD wit..
Sinognss Ls Series Battery Charger
A dual-slot battery charger for LS-series laser scanner battery packs.
Sinognss Ls300 Laser Scanner
A handheld 3D laser scanner from ComNav's SinoGNSS line that uses SLAM-based simultaneous localization and mapping rather than GNSS signals, so it can..
Sinognss Ls300 Laser Scanner Backpack Mount Kit
The backpack kit turns the LS300 into a wearable mobile mapping rig for walking surveys outdoors. It's roughly 33x26x16cm, weighs about 2.21kg, uses a..
Sinognss Ls300 Laser Scanner Car Mount Kit
This roof/vehicle mount kit attaches the LS300 laser scanner to a car for fast mobile scanning of roadside infrastructure and corridors. It measures r..
Sinognss Ls300 Laser Scanner M300 Dji Drone Mount Kit
This mount kit lets the SinoGNSS LS300 3D laser scanner pair with a DJI Matrice 300 drone for aerial LiDAR mapping. It's built from aviation-grade alu..