Search

The EL05 is the same compact electronic digital level body, offering 0.5mm accuracy over a 1km double run.

The FOIF DT402L is a digital laser theodolite combining electronic angle measurement with a visible laser pointer, used for angle-only surveying and a..

The FOIF EL03 is a digital electronic level offering 0.3mm accuracy over a 1km double-run levelling circuit, reading a barcode staff automatically to ..

The FOIF EL03 Pro is an upgraded digital electronic level offering 0.3mm accuracy over a 1km double-run levelling circuit, reading a barcode staff aut..

The EL05 is a compact electronic digital level with an LCD display, automatic height/elevation calculation, and internal memory or SD-card logging, of..

The GH-A300 is a one-piece forged steel geological hammer with a flat striking face on one side and a curved pick point on the other, 300g head weight..

This is a roughly 300mm rubber-duck whip antenna with an SMA male connector, covering the 457-467MHz UHF band for GNSS radio links.

The GDF112-BK is a black Leica-style tribrach with an optical plummet and circular vial, used to precisely centre and level an instrument over a surve..

The 2016C-10M is the same carbon-steel gauging tape and brass plumb-bob design, wound to a compact 10m length for small tanks and quick spot checks.

The 2016C-15M is the same carbon-steel gauging tape design at its shortest 15m length, for compact tanks or quick spot checks.

The 2016C-20M is the same reel-and-plumb-bob oil gauging tape design at 20m length, for smaller tanks or shallower dip points.

The 2016C-30M is the same carbon-steel oil gauging tape and brass plumb-bob design, wound to a 30m length for mid-size tank dipping.

The 2016C-50M is a carbon-steel oil gauging tape reel with a folding crank handle and a brass sounding weight on the tape end, used to dip and measure..

A small circular bubble vial in a clear plastic disc housing, sized to fit a 30-inch/2mm-sensitivity mount.

A generic 30"/2mm-sensitivity tube bubble vial, a common replacement size fitting a range of tribrachs and adapters.

The AKZ30 is a tilting triple-prism assembly: three 62mm copper-coated prisms in canisters on a polycarbonate mount, aluminum holder with 5/8-11 threa..

A 32mm clamp-on bubble base sized to match GP220TL/GP250TL telescopic GNSS rover poles, letting the surveyor confirm the rod is plumb before logging a..

A clamp-on circular bubble level sized for 25mm-diameter prism poles, clipping directly onto the pole barrel for an at-a-glance plumb check during set..

The same clamp-on bubble-and-base design, sized to grip 30mm-diameter prism poles for quick verticality checks in the field.